0
What else can I help you with?
How many inches per foot in a 2 percent slope?
Oh, dude, you're hitting me with some math now? Okay, okay. So, a 2 percent slope is like 2 inches of rise per 100 inches of run. And since there are 12 inches in a foot, you just divide 100 by 12 to get around 8.3 feet per foot on a 2 percent slope. Math is fun, right?
How many ft lbs in 120 degrees?
To convert degrees to foot-pounds, you need to know the context in which the conversion is being made. If you are referring to torque, 120 degrees would typically represent a rotational distance rather than a specific measurement in foot-pounds. However, if you are looking for the work done in foot-pounds when moving an object through 120 degrees, you would need additional information such as the force applied and the distance from the pivot point.
How do you CONVERT Square foot to lineal foot?
You don't. Square feet is a measure of area and lineal foot is a measure of length Your question is like asking how do you convert Gallons to Inches
What is the rise per foot in inches of a 30 degree slope?
"Rise per run" or something like that is the tangent function. Use your scientific calculator to calculate tan 30. Be sure to set your calculator to degrees first. Then - since you want the result in inches per foot - multiply this tangent by 12.
What does 2 degrees equal in height per foot?
0.42 inches per foot.
What is the pitch of a 6 foot drop in a 24 foot run?
"pitch" can be measured in degree or percent drop. So, if you drop 6' vertically over 24', you would the pitch, or slope, would be 25%. Expressed in degrees, given that 90 degrees is vertical, it would be 25% of 90, or 22.5 degrees of slope.
How do i know how many inches i need to drop IN one linear foot to gain a four percent slope?
Since one foot is 12 inches a four percent slope is .04X12 = 0.48 inch drop
How many inches per foot in a 2 percent slope?
Oh, dude, you're hitting me with some math now? Okay, okay. So, a 2 percent slope is like 2 inches of rise per 100 inches of run. And since there are 12 inches in a foot, you just divide 100 by 12 to get around 8.3 feet per foot on a 2 percent slope. Math is fun, right?
What is the rise per foot in inches of a 10 degree slope?
To calculate the rise per foot in inches of a 10-degree slope, you can use trigonometry. The formula is Rise = Run * tan(angle), where the angle is in degrees. In this case, the rise per foot in inches would be 10 * tan(10 degrees) = 10 * 0.1763 ≈ 1.76 inches. Therefore, for every foot along the slope, the elevation would increase by approximately 1.76 inches.
What is 70 degrees in foot pounds?
Degrees and foot-pounds measure different physical quantities; degrees measure angles while foot-pounds measure torque or energy. To convert an angle in degrees to foot-pounds, you need context about what you're measuring, such as the radius of a circle or the force applied. Without this additional information, a direct conversion isn't possible. Please clarify the context for a more accurate answer.
What is a regolith slope?
Rock that piles up at the foot of a cliff is a formed regolith slope.
How is a regolith slope formed?
Rock that forms at the foot of a cliff forms regolith slope.
Can you convert 85 psi of water pressure in a amount of air pressure?
One foot of water at 4 degrees Celsius is equivalent to 816.2 feet of air at 15 degrees C.
How much of 25 percent nitrogen fertilizer is needed for a 970 square foot bed?
A forty pound (40) bag is the amount of 25 percent nitrogen fertilizer needed for a 970 square foot bed.Specifically, calculate the amount of 25 percent nitrogen needed for a 1,000 square foot bed. Convert the 25 percent by multiplying it by 100 to get 4. Then divide 4 by 1,000 square feet to get 38.8 pounds.
How much slope per foot toilet drain?
All drains slope 1/4 inch per foot, minimum. Too much slope,though, can mean pulling water out of the trap or goose neck on a toilet.
How many ft lbs in 120 degrees?
To convert degrees to foot-pounds, you need to know the context in which the conversion is being made. If you are referring to torque, 120 degrees would typically represent a rotational distance rather than a specific measurement in foot-pounds. However, if you are looking for the work done in foot-pounds when moving an object through 120 degrees, you would need additional information such as the force applied and the distance from the pivot point.
How do you find a slope of a line segment?
Slope is expressed as the percentage of rise/fall in elevation over a specific distance and is determined by dividing the change in elevation by the length of the line. So if a line segment is 10 feet long and rises or falls 1 foot in elevation, the slope would be 1 ft/10 ft or 10 percent.
