Best Answer

Put some liquid in the measuring cylinder - to a height that is greater than the height of the pebble. Measure the level of the liquid. Then add the pebble into the cylinder and measure the level of the liquid again. the difference between the two levels is the volume of the pebble,

Put some liquid in the measuring cylinder - to a height that is greater than the height of the pebble. Measure the level of the liquid. Then add the pebble into the cylinder and measure the level of the liquid again. the difference between the two levels is the volume of the pebble,

Put some liquid in the measuring cylinder - to a height that is greater than the height of the pebble. Measure the level of the liquid. Then add the pebble into the cylinder and measure the level of the liquid again. the difference between the two levels is the volume of the pebble,

Put some liquid in the measuring cylinder - to a height that is greater than the height of the pebble. Measure the level of the liquid. Then add the pebble into the cylinder and measure the level of the liquid again. the difference between the two levels is the volume of the pebble,

🙏

🤨

😮

Study guides

☆☆

Q: How can we find the volume of a small pebble with the help of measuring cylinder?

Write your answer...

Submit

Still have questions?

Related questions

First put water in measuring cylinder and note the volume of water. Next, put the pebble in it.

Measuring the volume of liquids. It can also be used to measure the volume of small insoluble solids using the displacement method.

To measure the volume of liquids. It can also be used to measure the volume of small irregular objects that are submersible.

Measuring Pipette is for small amount of volume only.Graduated Cylindrers is for measuring large amount of volume.

A small difference exist because the beaker is not calibrated for volume.

-Use a a measuring cylinder and put 50 litres of water inside. slowly put the stone in and record the new volume. take the new volume and take away 50 and you got the volume of the stone. -Use the displacement method if the stone cannot fit into the measuring cylinder.

Volume of liquids. You could also use it to measure the volume of small solids using the displacement-of-fluid method.

using measuring cylinder (if the volume is large) using syringe / needle (if the volume to measure is very small, below 2 ml)

A small graduated cylinder or beaker.graduated cylinderA measuring cylinder, a volumetric flask, a pipette, a burette. In the kitchen a measuring jug.The volume of a liquid can be measured by a graduated cylinder.To measure most liquids in mL you can use a graduated cylinder

Assuming the rock is small enough to fit inside the cylinder: Partially fill the cylinder and mark the level to the water. Gently immerse the rock completely and measure the new volume. The difference between the two volumes is the volume of the rock.

Below is a method you can use when measuring relatively small objects. Firstly, you can pour a known amount of water into a measuring cylinder. Next place the object into the water and ensure that it is completely submerged. Note the increase in the height of the water and its coresponding volume marking. The increase in volume from the original volume of water is the volume of the object. You can use a displacement can instead of a measuring cylinder to make you result more accurate.

it is used to measuring small volume liquid

A tool that is used for measuring small amount of liquid is a graduated cylinder.

Fill the cylinder with water to a marked point. Then place the rock in the water and measure how much the water level rises. That will give you the amount of volume displaced by the rock and so the volume of the rock.

The beaker is not graduated and it is just 'slapped on', the measuring cylinder is more accurate, but has not got a great deal of accuracy. A pipette can measure small volumes accurately as the volume is can hold has been checked in manufacture.

It is used for measuring small volume of liquids .

when measuring small quantities of liquids.

a graduated cylinder

With measuring spoons, as in picture

pebble

Density is the mass of an object divided by its volume. Measuring mass is simple (with a scale or balance), but measuring a volume can be more difficult. One possible way is to place some water in a graduated cylinder and record the volume. Drop the object into the water. It has to sink and the water has to completely cover it. Record the second volume. The difference in the volumes is the volume of the object. Now the mass divided by the volume is the density.

Take a graduated cylinder and partly fill it with water. Read of the volume on the graduations: V1. Gently insert the thumb tack and make sure there are no air bubbles on it. Read the new volume, V2. The volume of the tack is V2 - V1, in the appropriate units. The volume of a single tack is quite small so the margin of error in measurement is relatively large. Therefore, if you have a number of identical thumb tacks, you may be better of measuring the average of several tacks put into the measuring cylinder together.

Drop the object into a graduated cylinder 50 mL half full of water and find the difference in volume. If it is too big for a measuring cylinder then make a small hole in the side of a plastic container, fill with water to this hole, drop the object in and collect the run off. Measure the volume of the run off.

The liquid volume can be determined by pouring the liquid into a measuring cup.

A measuring cyling ( you fill it up with water then you put the stone in and the change is the volume)