35
Concrete is a mixture of cement , sand, gravel and water. A cubic yard of concrete is 3' x 3' x 3' . That's 3x3=9x3=27 . 27 cubic feet = 1 cubic yard . So it's 27 feet divided by 3 inches equals 108 sq ft!
To convert pounds to cubic meters, you need to know the density of the material being measured, as weight and volume are related through density. For example, 5,000 pounds of water would occupy about 1.89 cubic meters, since water has a density of approximately 1,000 kg/m³. However, for different materials, the conversion would vary based on their specific densities. Therefore, without knowing the material, it's not possible to give an accurate cubic meter equivalent for 5,000 pounds.
She will weigh 160000 pound-weight.
225 Pounds. (:
170 lbs
Around one hundred pounds.
Roughly about 30 pounds per cubic foot, so 2 cu ft is about 60 pounds
The weight of 2 cubic feet of wood mulch typically ranges from 20 to 40 pounds, depending on the type of wood and its moisture content. On average, you can expect around 30 pounds for this volume. Keep in mind that different types of mulch, such as bark or shredded wood, may vary slightly in weight.
Bark mulch weighs between 400 to 800 pounds for one cubic yard. The actual weight depends on how much moisture is in the mulch.
2.5 cubic feet of water weighs about: 156 pounds.
10pounds
You want to order your mulch in cubic feet, so multiply length x width x depth and that's the answer. (Make sure ALL the measurements are in feet.)125 x 60 x .5 = 3750 cubic feet
25 cubic feet or about 1 cubic yard.
Eight cubic feet of rubber mulch typically weighs between 400 to 800 pounds, depending on the specific type and density of the rubber used. Generally, rubber mulch is lighter than traditional mulch materials. It's important to check the manufacturer's specifications for the exact weight, as variations can occur.
On average, 8 cubic feet of concrete can weigh around 4,000-4,500 pounds, depending on the density of the concrete mix.
The weight of 0.4 cubic feet depends on the density of the material. To convert volume to weight, you need to know the specific density. If we assume an average material density of 100 lbs/cubic foot, then 0.4 cubic feet would weigh 40 lbs.
3.1 cubic yards for every 2 inches deep you want it to be.