66.7
The weight of a gallon of gasoline is approximately 6.3 pounds at 60 degrees Fahrenheit.
BTUs, or British Thermal Units, measure the amount of heat energy required to raise the temperature of one pound of water by one degree Fahrenheit. The formula to calculate BTUs is: BTUs = weight of water (in pounds) x temperature change (in degrees Fahrenheit) x 1. Alternatively, the formula can be expressed as: BTUs = (Flow rate in gallons per minute x change in temperature in degrees Fahrenheit) / 500.
The weight of a gallon of polyglycol can vary depending on the specific type and temperature of the polyglycol. On average, a gallon of polyglycol can weigh around 9-10 pounds.
Density is calculated as mass per unit volume, so to find the density in pounds per gallon, you would divide the weight (mass) of a gallon of water (9.4 pounds) by the volume of a gallon (1 gallon). Therefore, the density of water in pounds per gallon is 9.4 pounds.
About 8.35 pounds for one US gallon of water.
The weight of a gallon of water at 229 degrees Fahrenheit would be approximately 8.33 pounds. This is because water's density changes with temperature, and at 229 degrees Fahrenheit, water is less dense compared to when it is at room temperature.
A gallon of gasoline weighs approximately 6.3 pounds (2.8 kilograms) at a temperature of 60 degrees Fahrenheit (15.6 degrees Celsius).
The density of nitrobenzene at 100 degrees Fahrenheit is approximately 1.2 grams per cubic centimeter.
The weight of a gallon of gasoline is approximately 6.3 pounds at 60 degrees Fahrenheit.
About 6.25 pounds per gallon at 72 degrees Fahrenheit.
The weight per gallon of 20-degree Baume hydrochloric acid is approximately 9.51 pounds.
About 8.35 pounds.
This is a pretty straightforward calculation. By definition, a BTU is the amount of energy required to raise one pound of water one degree F. But you have one gallon of water, which weighs approximately* 8.34 pounds. So, you'd need 8.34 BTU to increase one gallon of water one degree F. Note how the amount of time was not important. Whether you heat the water slowly or quickly doesn't matter. You will still require 8.34 BTU to raise the temperature of a gallon of water one degree F. * I say approximately because the weight of water varies slightly with its temperature. Water is at its densest at 4 degrees Celsius (39 degrees F). A gallon of water at temperatures above and below that value will weigh less.
No, one gallon of water weighs approximately 8.34 pounds. This is because water has a density of about 8.34 pounds per gallon at room temperature.
A gallon of water weighs about 8.34 pounds (3.78 kilograms) at room temperature.
U.S.gallon = 8.33 pounds of water. Therefore to raise the temperature by one degree F will require 8.33 BTU. The initial temperature of 50 F is inconsequential.
Aviation gasoline (avgas) has an average weight of slightly over 6 pounds per gallon (6.02) at a Standard Day temperature of 15 degrees C or 59 degrees F.