Study guides

☆☆

Q: What is bigger 0.01 or 0.03?

Write your answer...

Submit

Still have questions?

Related questions

On the main bearings, .001, to .003.

Yes, 0.001 is less than 0.003

The factors of 123 123 123 are 3, 9, 41, 124, 369, 333 667, 1 001 001, 3 003 003, 13 680 347 and 41 041 041.

the 4 odd numbers just before 200 003

The smaller the value the closer it is to zero..003 < .01, therefore .003 is closer to zero.On a number line (not to scale):---(0)--(.001)-(.002)-(.003)-(.004)-(.005)-(.006)-(.007)-(.008)-(.009)-(.010)-(.011)Notice how .003 is closer to 0 than .010

.001 meters is 3 times bigger than millimeters. 1 millimeter is .001 meter

mm is bigger. Mm is milimeter, which is .001 meters. A micro meter is .000001 meters

On the main bearings, you should fall between .001, and .003. If it is high performance, and you are going to rev it, go .002. Looser will rev.

.0032 is greater than .003

nothing since they both are one.

A gram. A milligram is .001 of a gram. So, a gram is 1000 milligrams.

1 kg = 1000 grams 1 gram = .001 kg

yes, by far. For further clarification, message me on my message board. Thanks!

003: Sceptile

003 = three.

001, 002, 003, 004, 005, 010, 011, 012, 013, 014, 015, 020, 021, 022 and 023.

the larger number is 0.1 because a tenth, which is the first place value after the decimal is bigger than a thousandth, which is the third number after the decimal.

First off, you don't play a .001 file. This extension is commonly used hand-in-hand with the .002, .003, etc... You need all the pieces of the file in order to use them. You need to download a program that can piece together these files. After your piece them together, you can use the file.

.003= three thousandths

.003 is faster than .005

chickorita bayleef meganium totodile croconaw feraligater cyndaquil quilava typhlosion

the L stands for Liters. the da stands for a factor of 10. the lowercase m stands for a factor of .001 so 1 daL = 10 Liters and 1 mL = .001 Liters Therefore, yes daL is bigger than mL.

No. micrometer means 0.000 001 of a meter; cm. means 0.01 of a meter.

.003 intake .003 exhaust

Put piston on top dead center on compression stroke, remove tappet covers, loosen jam nut and set clearance at .001-.003 for the intake and .003-.005 for the exhaust. Tighten jam nut. Make sure you install new o-rings on tappet covers.

People also asked