1:in min mode mn/mx- is connected to vcc .here now mn will be one AND IN MIN MODE ONLY ONE PROCESSOR IS PRESENT WITHOUT ANY CO PROCESSOR . 2: in max mode mn/mx- is cnnected to ground now the mx will become 1. AND IN MAX MODE MANY PROCESSORS ARE CONNECTED TO EACH OTHER WITHOUT ANY CO PROCESSOR EX FOR COPROCESSOR IS 8284
1:in min mode mn/mx- is connected to vcc .here now mn will be one AND IN MIN MODE ONLY ONE PROCESSOR IS PRESENT WITHOUT ANY CO PROCESSOR . 2: in max mode mn/mx- is cnnected to ground now the mx will become 1. AND IN MAX MODE MANY PROCESSORS ARE CONNECTED TO EACH OTHER WITHOUT ANY CO PROCESSOR EX FOR COPROCESSOR IS 8284
The pin#33 selects the mode. If connected to +5vcc => minimum mode & if grounded => maximum mode.Bothe have different functions coz changing the mode changes the functionality of some others pins too. INTEL's pre release 8085A, to support its features, minimum mode was there while to support the modern design journey of microprocessors, maximum mode was available. MINIMUM MODE operation is least expensive way to operate the 8086/8088 'coz all the control signals were generated, for the io or and memory, by the processor and allowed the 8085A without any special consideration MAXIMUM MODE; some of the control signals must be generated externally, requires an addition of an external bus controller 8288. maximum mode had the ability to control the external buses and was used only when coprocessors were attached with the processors.
Minimum mode is single processor mode but maximum mode is coprocessor mode
you do it yourself
the rang ( of the rang ) the difference between the maximum and minimum values in a data set.
The minimum and maximum refers to the number of sunspots.
The minimum and maximum refers to the number of sunspots.
It is the time delay between a maximum or minimum insolation and maximum or minimum air temperature
Minimum: (AMU/30.4)*(Leadtime*SafetyStock) Maximum is the Difference between the Minimum and Buy Qty
The difference is that the maximum is normally larger than the minimum.
I'm sure that this question means altitude. Altitude is vertical distance between the maximum or minimum of the ocean wave (or any wave) and halfway between the minimum and maximum. Half the vertical distance between the minimum and maximum of the wave.
range
The minimum varies from state to state. The maximum is "until death". (There is no maximum age listed, in any state.)
The leftmost point is the minimum value.The rightmost point is the maximum value.The difference between them is the range.The leftmost point is the minimum value.The rightmost point is the maximum value.The difference between them is the range.The leftmost point is the minimum value.The rightmost point is the maximum value.The difference between them is the range.The leftmost point is the minimum value.The rightmost point is the maximum value.The difference between them is the range.
Find the minimum and maximum values from the given data. Then range is the difference between maximum and minimum values.
Range