15 cubic feet of what? - Different substances have different densities. There is no general conversion between volume and mass (or volume and weight).
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
a cubic ton
Without knowing the density of the material it is not possible.The question has no meaning. A ton is a measure of mass, cubic feet is a measure of volume. It makes as much sense as asking how heavy one hour is.
Different types of stone have different densities and therefore different weights per cubic foot, rendering this question unanswerable unless you know the weight of the stone per cubic unit.
1 ton, but I don't know whether that's a short ton or a long ton. A cubic ton is a measurement of volume (i.e. how much space it takes up). A cubic ton of sand is how much space a ton of sand takes up. A cubic ton of timber is how much space a ton of timber takes up, and as timber is lighter than sand, a cubic ton of timber is larger than a cubic ton of sand, even though they both weigh the same. As for the volume of a cubic ton of sand, I have no idea. You could get a rough answer this way: "m" divided by "d" where m =one ton in whatever units you are using (e.g. kg) and d = density of sand (in the same units)
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
That depends on how muddy - the water to dirt ratio. A cubic foot of average mud is about 85 pounds. A ton is 2000 pounds, so that is 2000/85 = 23.5 cubic feet
A "cubic ton" (or "cubic tonne") is a measure of volume, which depends on the object contained therein. Therefore, there is no simple answer to this question. Refer to the Wikipedia link, below, for further information, or enter "cubic ton" into your favorite search engine.
Masonry sand is estimated to weigh approximately 160 pounds per cubic foot. Therefore, it would take 12.5 cubic feet of masonry sand to equal one ton.
At 100 pounds per cubic foot, that is 20 cubic feet per ton = 0.57 cubic meters
about 6 cubic feet
a cubic ton
One metric ton of plain water has a volume of about 35.32 cubic feet.
Without knowing the density of the material it is not possible.The question has no meaning. A ton is a measure of mass, cubic feet is a measure of volume. It makes as much sense as asking how heavy one hour is.
13.33 cubic feet
There is no sensible answer to the question. A ton is a measure of mass. A cubic foot is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. If you are not convinced, consider 500 cubic feet of air. How many tons? Next consider 500 cubic feet of lead. How many tons?
no. a cubic centimeter has a mass of 11.34 grams there are 1,000,000 cubic centimeters in a cubic yard therefor one cubic meter of gold = 11,340,000 grams or 11,340 kg. a metric ton is 1000 kg a US ton (short ton) is 2000 pounds or 907.2 kg a UK ton (long ton) is 2240 pounds or 1,016 kg In any of the above a cubic meter of lead would be over 11 tons. Almost correct. Assuming a purity of 999.9% 1 cubic metre of lead = 11.0229 short tons 9.8425 long tons 10 tonnes (metric) therefor:- 1 short ton (US) of lead = 0.110 cubic metres or 3.884 cubic feet 1 long ton (UK) of lead = 0.0984 cubic metres or 3.474 cubic feet 1 tonne (metric) of lead = 0.100 cubic metres or 3.515 cubic feet