A "cubic ton" (or "cubic tonne") is a measure of volume, which depends on the object contained therein. Therefore, there is no simple answer to this question. Refer to the Wikipedia link, below, for further information, or enter "cubic ton" into your favorite search engine.
36,000 pounds, aprox 20 cubic yds. 20 cubic yards spread out at 2 inches will cover 3200 square feet. hope that helps.
To convert 2.66 tons per cubic meter to tons per cubic feet, you first need to convert cubic meters to cubic feet. There are approximately 35.3147 cubic feet in 1 cubic meter. Once you have the conversion factor, multiply the given value (2.66 tons per cubic meter) by the conversion factor to get the equivalent value in tons per cubic feet.
A cubic yard of concrete typically weighs between 3,000 to 4,000 pounds (1.5 to 2 tons) depending on the density of the concrete mix.
To convert cubic yards of sand to tons, you can use the following formula: 1 cubic yard of sand is approximately equal to 1.35 tons. Therefore, 9800 cubic yards of sand would be approximately equal to 9800 * 1.35 = 13230 tons.
Yes, you need to know the density of tarmac which varies depending on the aggregate used but is around 2.4 tonne per cubic metre
One cubic yard of concrete typically weighs about 4,000 pounds, which is equivalent to 2 tons. This weight can vary slightly based on the specific mix and aggregate used, but 2 tons is a standard estimate for most concrete.
That depends on the pounds per cubic feet (PCF) of the the sands. Sand will vary from one place to another. Assuming 106.5 pcf, 1 cubic yards (27 cubic feet) would be 1.44 tons, but 2 tons would be the 2 tons recommended order for safety's sake. A like to a sand calulator is attached.
To convert cubic meters (m³) to tons, you need to know the density of the material you are converting, as tons measure weight while cubic meters measure volume. The formula is: tons = cubic meters × density (in tons per cubic meter). For example, if the density of the material is 2 tons/m³, then 1 m³ would equal 2 tons. Always ensure to use the correct density corresponding to the specific material for accurate conversion.
1.6 tons
as a rule of thumb, 1 cubic yard of concrete weighs about 4,000lbs or 2 short tons
There is no such thing as a "cubic ton". You can have cubic meters, but not cubic tons.
1000
105,000 tons
To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.
One cubic yard of broken limestone weighs about 1.3 tons. One cubic yard of pulverized limestone weighs about 1.17 tons.
1 cubic yard = 1.3 tons
It could be with a material of the correct density. 2 tons = 4000 pounds = 1814 kg. Divide by 5 cubic meters. So if you have a density of 362.8 kg/m3 = 0.3628 g/cm3 then 5 cubic meters would have a mass of 2 tons.