0
What else can I help you with?
It covers most of Earth’s land surface. A.TopsoilB.SubsoilC.SoilD.Humus?
topsoil
How do you convert acre feet of storage to cubic yards?
To convert acre-feet to cubic yards, you can use the conversion factor that 1 acre-foot is equal to 1613.26 cubic yards. Simply multiply the number of acre-feet by 1613.26 to obtain the equivalent volume in cubic yards.
How many cubic yards in 6 acers of land 3 feet deep?
There are 810 cubic yards in 6 acres of land that is 3 feet deep. This calculation is based on the conversion factor that 1 acre equals 4840 square yards and that 1 cubic yard equals 27 cubic feet.
How much land is 150 x 150?
A plot of land that is 150 feet by 150 feet covers an area of 22,500 square feet.
3 feet of water over one acre of land equals how many gallons?
One acre of land is equivalent to 43,560 square feet. With 3 feet of water covering this area, you would have 130,680 cubic feet of water. One cubic foot is equal to 7.48 gallons, so 130,680 cubic feet of water would be about 977,370 gallons.
What formula do you use to determine How much land a billion pieces of notebook paper covers?
about 12 million square feet.
How can an open mine be restored to agricultural land?
Remove subsoil and topsoil.
Which is a land management technique that limits topsoil loss?
strip cropping
What area of land would 1 ton of top soil fill?
"Rule of thumb, 1.5 tons equals a cubic yard. 1 ton covers approximately: 220 sq ft at 1 in depth 110 sq ft at 2 in depth 73 sq ft at 3 in depth 36 sq ft at 6 in depth 22 sq ft at 9 in depth" east haven landscape 2008.
What blows topsoil away?
Strong winds, such as those in a sandstorm or tornado, can blow away topsoil. Deforestation, overgrazing, and poor land management practices can also contribute to soil erosion and the loss of topsoil.
How much dirt is there in a hole three acres square and two hundred feet deep?
There is no dirt in the hole, but if you want to know how much dirt was removed to create the hole, then:3 acres is an amount of area (you don't have 'square acres'). You could express this volume as acre-feet, but this term is usually used when referring to flooding (an acre of land flooded with 1 foot of water, for example). 1 acre = 43560 square feet, so 3 acres = 130680 square feet.(130680 square feet)*(200 feet) = 26136000 cubic feet {26.136 million cubic feet} In the dirt industry, the standard measurement is cubic yards {often referred to as just 'yards' of dirt}. There are 27 cubic feet in a cubic yard, so this is equivalent to 968000 cubic yards.
What is topsoil useful for?
Growing food. And other plants that live on dry land.
