0
There is no dirt in the hole, but if you want to know how much dirt was removed to create the hole, then:
3 acres is an amount of area (you don't have 'square acres'). You could express this volume as acre-feet, but this term is usually used when referring to flooding (an acre of land flooded with 1 foot of water, for example). 1 acre = 43560 square feet, so 3 acres = 130680 square feet.
(130680 square feet)*(200 feet) = 26136000 cubic feet {26.136 million cubic feet} In the dirt industry, the standard measurement is cubic yards {often referred to as just 'yards' of dirt}. There are 27 cubic feet in a cubic yard, so this is equivalent to 968000 cubic yards.
What else can I help you with?
What is the total acres if you have a parcel of land that is 400 feet wide and 400 feet deep?
400 by 400 feet = 160,000 square feet 160,000 square feet = 3.6730946 acres
How big is ten thousand square feet?
A ten thousand square foot home dimensions can be one hundred feet wide, by one hundred feet deep, even two hundred feet wide, by fifty feet deep. Depends on the design of the home and or the lot your building it on.
If land is 80 feet wide and 180 feet deep how many acres is this?
Answer: 14,400 ft² = 0.330578 acres.
What is the total acres if you have a parcel of land that is 102 feet wide and 584 feet deep?
1.37 acres, approx.
200 feet wide x 400 feet deep how many acres?
1 ACRE IS 43,560 SQ FT. SO YOUR 200 FT X 400 FT (80,000 SQ FT) IS 1.83655 ACRES, MORE OR LESS. -eXpReXo
How many cubic yards in an acre 3 inches deep?
Three acres three inches deep is 403.33 cubic yards.
If you have an area that is 605ft wide and 605ft deep how many acres do you have?
This area comprises 366,025 square feet which is equal to: about 8.4 acres. (8.40277778)
What is the total acres if you have a parcel of land that is 400 feet wide and 400 feet deep?
400 by 400 feet = 160,000 square feet 160,000 square feet = 3.6730946 acres
Convert 33 meters wide 27 meters deep to acres?
To convert meters to acres, first calculate the area in square meters by multiplying width (33m) by depth (27m) which equals 891 square meters. Then convert square meters to acres by dividing by 4046.86 (conversion factor), which gives approximately 0.22 acres.
200 feet wide x 600feet deep how many acres?
One acre is 43,560 square feet. The conversion would be 2.75 acres.
If land is 180 feet wide and 480 feet deep how many acres is this?
The area is 180 feet times 480 feet = 86400 square feet. 86400 square feet are 1.983471 acres.
How many acres is 165 feet wide and 264 feet deep?
To calculate the number of acres, first convert the dimensions from square feet to acres: 165 feet wide * 264 feet deep = 43,560 square feet. Then, divide by the number of square feet in an acre (43,560 square feet) to get the answer. In this case, 1 acre is equivalent to 43,560 square feet, so the area is 1 acre.
How many miles is 42 acres?
it takes 640 acres to make a square mile. 42 acres = .15625 square miles an acre is approx 208.71 feet squared if you had 42 acres end to end, you would have a piece of land that is 1 acre x 42 acres deep or approx 208.71 feet wide x 5009.05 feet deep, which would equal about .039 miles x .95 miles deep. hope this helps
How much dirt is in a whole 3 acres square and 200 feet deep?
To determine the volume of dirt in this scenario, you would multiply the area (3 acres) by the depth (200 feet). First, convert acres to square feet (1 acre = 43,560 square feet). Then, multiply the area (3 acres = 130,680 square feet) by the depth (200 feet) to find the total volume of dirt.
How big is ten thousand square feet?
A ten thousand square foot home dimensions can be one hundred feet wide, by one hundred feet deep, even two hundred feet wide, by fifty feet deep. Depends on the design of the home and or the lot your building it on.
How many acres would a farmer need to spread 21900 cubic feet if he wanted it no more than 6 in deep?
If you spread out 21,900 cubic feet of material in such a way that it's 6" (1/2 foot) deep,then it covers 43,800 square foot of area.1 acre = 43,560 square feet43,800 square feet = (43,800/43,560) = 1.0055 acres . . . only 240 square feet more than 1 acre.
What would be the width and depth of 7.89 acres?
There are 43560 square feet in 1 acre. You multiply 7.89 x 43560 and get 343688.4 If you are looking for a perfect square lot, you take the square root of that and you get 586.25 feet. So, a square lot of 586.25 feet wide and deep would give you 7.89 acres.
