The units are incompatible. Psi refers to pounds per square inch voltage is a measure of electro motive force.
The k in kV stands for 1,000 and the v stands for volts. Divide 25,000 by 1,000 you get 25 kv.
About 25
you should be paying attention in class. you should listen. you should know the answer. what is your problem big man. the answer is obvious. it is 25 volts
W = Amps times Volts. A = W/V, A = 300/120 = 2.5 amps
As asked, the question cannot be answered. At 1 volt, 300 Watts = 300 Amps. At 10 volts, 300 Watts = 30 Amps. At 100 volts, 300 Watts = 3 Amps. At 120 volts, 300 Watts = 2.5 Amps. At 240 volts, 300 Watts = 1.25 Amps. To calculate the relationship between Amps, Volts and Watts, use the formula: Watts = Amps * volts
25-30 psi
100 psi and all within 25%100 psi and all within 25%
about 25-30 psi....
Fully charged battery should have 12.6 volts. 75% charged 12.4 volts, 50% charged 12.2 volts, & 25% charged 12.0 volts.
The k in kV stands for 1,000 and the v stands for volts. Divide 25,000 by 1,000 you get 25 kv.
A: It should be the same if equal size [after 5 times RC], However if one has a 5 volts rating and the other is 25 volts rating they probably will both blow up if connected across 30 volts source in series. Why if one leaks and they all do then the 5 volts will blow then the 25 volts the voltage must be equalize for each to be used in series.
Well, 25 twos is equal to 50. So 10 fives are equal equal to 25 twos.
Approximately 125 psi, all within 25%.Approximately 125 psi, all within 25%.
25 psi x2 35 psi loaded
.25
10.85 psi.
100 psi to 140 psi.