0
To answer this question the voltage of the bulb is needed.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is a pool pump motor drawing half the amps listed on its nameplate a problem with the windings?
A pool pump motor which is drawing half the amps listed on its nameplate can indicate a problem with the windings or a lack of incoming current. Pumps will only draw as many amps as are required to operate under the current load.
What size breaker should you use for a pool pump six GFCI outlets and a overhead light?
The sizing of a breaker is dependant upon what the amperage of the loads are. I = W/E, Amps = Watts/Volts and W = I x E, Watts = Amps x Volts are two formulas that can be used. Without any voltages, amperage's or wattage's this question can not be answered.
How to Replace 120 volt pool light with a 12 volt pool light?
You may not be able to do that. The 12V system will have a larger cord and may not pass thru the exhisting conduit. Call an electricial who knows swimming pool electrical codes.
A light bulb is set in the bottom of a 3m-deep swimming pool. What is the diameter of the circle of light seen on the water?
As an ordinary light bulb will illuminate the whole pool, not just a circle you must be thinking of a spotlight bulb. The answer will depend on how tightly focused the spotlight is.
How many gallons of water does a pool 10'x15'x52inches hold?
For this size pool, about 4,862.3 gallons.
How many amps does a Hayward 1 Hp Pool Pump Motor use?
1 HP = 745.70 wattsPower (watts) = Current (amps) x VoltsSo if you use a 110 volt system, amps = 745.7/110 = 6.779 ampsIf you use a 220 volt system, amps = 745.7/220 = 3.389 ampsFor a 12 volt system, amps = 745.7/12 = 62.142 amps
Is a pool pump motor drawing half the amps listed on its nameplate a problem with the windings?
A pool pump motor which is drawing half the amps listed on its nameplate can indicate a problem with the windings or a lack of incoming current. Pumps will only draw as many amps as are required to operate under the current load.
What do light and the game of pool have in common?
There are many colors ;)
How do you know how many lights you have to place on the walls of a swimming pool?
That would depend on the type of light, the wattage, the shape of the pool and the size of the pool.
How many amps does a 1.0hp pool pump pull?
One horsepower is equivalent to 746 watts. So if the motor is wired for 220 volts the current consumed is 3.39 amps. (watts divided by voltage = current) so? the label says 7.6 amps for a 1hp with a SF of 1.25 at 240 volts. 9.6 for a 1.5 hp .this is your typical pool pump motor, what motor are you getting data from ?
What is that cool swimming pool fan called that pulls you under water?
sea scooter
Could lightning damage a pool light?
Yes, lightning can damage a pool light.
If you have just leased a home and cannot find the switch to turn on the pool light how can you trace it?
Pool lightCall the company or person that leased you the property and ask them where the switch is to the pool light. If they don't know; often a pool light is turned on by a breaker in the panel marked "pool light." A breaker is an overcurrent protective device, it can not be used to "switch" a light unless it is marked "SWD".
How can you install wiring for a swimming pool light?
Have a professional do it. As an insurance adjuster I had a death claim when the apartment maintenance man "fixed" the pool light and a young girl was killed by electric shock from improper wiring of the pool light.
Where can one purchase a swimming pool light?
You can purchase a swimming pool light online from the Pool Supply World website. Alternatively, you can also purchase these lights from retailers such as Amazon.
How do you remove a pool light when the screw is stripped?
There is a pool company - wholesale only- who sells a pool light ring just for this purpose. Your favorite pool store can order one . You just have to know the brand of light fixture. But first the broken screw has to be removed by drilling it out. k
What size breaker should you use for a pool pump six GFCI outlets and a overhead light?
The sizing of a breaker is dependant upon what the amperage of the loads are. I = W/E, Amps = Watts/Volts and W = I x E, Watts = Amps x Volts are two formulas that can be used. Without any voltages, amperage's or wattage's this question can not be answered.
