0
you can cut a hole in wood using a special drill attachment. alternatively you could drill a hole then cut a hole with a jigsaw
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoDrill and bit
Add your answer:
Earn +20 pts
Is a piece of wood straight or round?
some wood can be cut round and some can be cut straight so the answer i suppose is yes
What is the function of a hole saw?
A hole saw is a round metal cup with teeth on the rim and usually a threaded centre hole to mount it on an arbor. Most common uses are cutting lock holes in doors and holes for faucets in new countertop.
Is a hole saw a circular saw?
"Yes, a hole saw is a circular saw. It is primarlily used to cut through thin materials and is used in a drill. Hole saws, or circular saws, are used to cut wood, plastic, concrete, or stone, depending on the type you have." A hole saw refers to the bit. Round bit like a piece of pipe, used in a drill, that cuts a hole and leave a donut or plug from the hole instead of an auger or butterfly bit that chips out all of the wood in the hole. A circular saw is the saw that uses a flat circular blade to cut in a straight line.
What type of energy is used to cut a piece of wood?
Chemical and mechanical energy is used to cut a piece of wood.
How do you cut a shallow round hole in a fieldstone to make bird baths?
Hammer and chisel
Will a ring saw cut anything?
If you mean a 'hole saw' -which cuts a circular hole, - then there are versions of them to cut wood, more expensive ones to cut metals, and really expensive diamond tipped ones to cut tile and stone.
What does the Makita Reciprocating Saw mainly used to cut?
This power tool is used to cut tough wood, it can be used on bare tree wood to turn it into workable wooden planks. It can also be used to cut plastic.
What is used with a hammer to cut Wood?
chisel
What are some basic wood work tools?
Some basic wood work tolls are- 1.Rasp- Used to remove excess material and shape the wood. 2.Tenon Saw- Used for cutting straight lines. 3.Coping Saw- Used for cutting curve lines. 4.Jackplane- Used for trimming cut edge to the straight line. 5.Spokeshave- Used fro trimming cut edge to a curve line. 6.Screw Drill- Used to make a hole in the wood to make a screw joint. 7.Hammer- Used for nailing the Wood.
What is a compound saw used to cut?
A compound saw is used to cut mainly wood. One can cut wood into the shapes they require to construct objects such as wooden boxes or picture frames for example.
What is fine cut files used for?
A fine cut file is used for filing down wood and other materials. It is also used to smooth the edges of materials such as wood, metal or plastic.
How would you install commercial 2X4 ceiling tile to a dry wall ceiling?
Sheet rock screws. Alternative: If you have a hole in your ceiling and want to fix it you use a piece of wood to hold a piece of Sheetrock which you will finish with plaster or joint compound. You would cut a piece of wood more narrow than the hole and longer than the hole. Put the wood into the hole so it cannot fall out. Cut a piece of Sheetrock to about match the hole and screw the new piece of Sheetrock to the wood. Use joint compound to give the repair a finished look. If you simply put joint compound into the hole it will crack and take many coats. Paint.
