It is necessary to assume that there is no evaporation of the painting solution - 100% solids / volume.
It is known that 1 gallon of paint with no evaporation (100 % solids / volume) will
cover 1604 sq' at a thickness of 1 mil - this is regardless of the paint solution.
1604 sq' / 385 sq' is approx. 4166 micrometers - with no evaporation.
About 105 square feet or 9.75 square meters on a smooth surface with no waste at 4 mil thickness
That question cannot be answered because it does not describe how large the bag is, where the bag is relative to the gravitational attractor. It does not describe what "hold" means and it does not describe what the contents of the bag is. Further, it is unclear if you mean bags for holding cotton or bags made of cotton.
per gallon of mercury the average price nowadays is $4.50
To obtain the number of grams of CO2 emitted per gallon of gasoline combusted, the heat content of the fuel per gallon is multiplied by the kg CO2 per heat content of the fuel. The average heat content per gallon of gasoline is 0.125 mmbtu/gallon and the average emissions per heat content of gasoline is 71.35 kg CO2/mmbtu.
For a gallon of milk it would weigh around 8.6 lbs.For a gallon of mike you would need to understand which specimen it would be related to, calculate the average percent of organic tissues, factor in the mass of liquids, multiply it by the lbs/cm3.
The surface area would depend on the thickness of the layer formed by pouring out the gallon of liquid. The outside surface of a gallon container can also vary substantially based on its shape. Gallons are units of volume, not area.
Anywhere from 300-500 square feet depending on the thickness/thinness of the paint, how many coats you're putting on from a single can, and how large the surface is you're painting. However, 300-500 square feet is an approximate average of how much a gallon of paint should cover.
Depending on the placement and thickness of the shakes, anywhere from 150 to 300 square feet per gallon.
About 105 square feet or 9.75 square meters on a smooth surface with no waste at 4 mil thickness
A gallon of paint covers about 300 square feet at a usual thickness of one coat; your example of 0.1 cm thick is very thick coat, equivalent to about 6 coats of paint at least; you could cover about 300/6 =50 square feet at that thickness.
The average cost of a gallon of milk in 2003 was $3.19. In 2012, the average cost of a gallon of milk was $3.53.
$1.33.5 per gallon average
The average cost of a gallon of gas is $3.65.
21
about 370-400sq ft for smooth surface less coverage with textured coverings and no primer on plastered walls
the average price per gallon of gas in 1988 was $1.08
The average price of gas in 1995 was $1.16 per gallon.