Want this question answered?
minimum
The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.The extrema are the maximum and minimum values.
There is no minimum (nor maximum) value.
Cryptosporium minimum was created in 1907.
There is no minimum value for the cosecant function.
Usually for a power factor lower that 90% a service charge will be added to the monthly electrical bill. On power factor correction calculations try to get the power factor up to 95%.
The absolute minimum for a circuit is continuity. Without this it is not yet a circuit.
one every 8 feet
Capacitors used in electronic circuits need not have a minimum voltage rating of 25 volts. Electronic circuits powered by batteries at 12 volts and below should work fine with capacitors rated at 15 volts.
By today's NEC standards, all kitchens are required to have to have a minimum of two 20 amp circuits.
A continuous lighting kits costs approximately $200.00 US Dollars off Amazon. You can also get free shipping for this product since your order will be over the minimum $25.00 US Dollars to qualify.
It shouldn't hang lower than 7-8 ft. That way your "track" lighting doesn't become "wack!" lighting. Ü By NEC Code, Track Lighting on a wall must be installed at least 5 ft. above the floor unless protected or is a low voltage type of track.
60 amp using AWG # 6 copper for branch circuits.
We offer Induction Lighting solutions for very sound commercial reasons, but we are acutely aware of, and do often use LED and T5 lighting systems in our solutions. LEDs have an extensive feature in our portfolio and in many cases are a viable option and our designs take all factors into consideration. However, when high light outputs are required our experiences to date favour Induction lighting to ensure a robust, cost effective solution, when payback periods are the crucial factor, especially in applications requiring the minimum of maintenance.
A: Most LED needs a minimum voltage and minimum current in the right direction positive anode negative cathode to light up. Unfortunately the voltage can be as low as 1.2 to 5v and the same apply to the current from 5ma to 500ma. So there is no set values it depends on the device.
Engineers usually call for #12 wire to be the minimum in commercial and industrial installations on lighting and receptacles. As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed. Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Halogen desk lamps are a great choice for lighting needs. They provide bright, soft light that will keep headaches to a minimum. They are also great at getting light exactly where it is needed most.