Watt is the unit of power and amp is the unit of current,power in DC circuit is product of volthe and current but in AC circuit it is the product of voltage and currentand power factor ie P=VIcos phi
At 240v single phase it's 70.8 amps. If it runs on 2 wires plus ground, take the voltage rating of the equipment and divide that into the watts to get amps. At 480v 3 phase it's 25.8 amps. At 208v 3 phase it's 47.2 amps. <<>> There are zero amps in 14 kW. A voltage needs to be stated. I = W/E, Amps = Watts/Volts.
As asked, the question cannot be answered. At 1 volt, 300 Watts = 300 Amps. At 10 volts, 300 Watts = 30 Amps. At 100 volts, 300 Watts = 3 Amps. At 120 volts, 300 Watts = 2.5 Amps. At 240 volts, 300 Watts = 1.25 Amps. To calculate the relationship between Amps, Volts and Watts, use the formula: Watts = Amps * volts
Power = E times I = (24 x 2) = 48 watts
This depends on the voltage ... amps = watts / volts 660 W / 110 V = 6 amps 660 W / 220 V = 3 amps 660 W / 330 KV = 2 mA
Voltage of the pump (12) multiplied by the current draw = the watts used. This would be 12 watts if the current was 1 amp, 24 watts if the current is 2 amps, and 36 watts if the current is 3 amps, and so on...
The formula you need to use is I = W/E. Use this, easier for the average person: The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts. For example 1 amp * 110 volts = 110 watts 500w = 250v X A amps Therefore: 500w/250v= 2amps
The conversion of watts to amps at a fixed voltage is governed by the equation Amps = Watts/Volts for example 12 watts/12 volts = 1 amp for a US example, a food mixer with a 400 watt motor on a 120 volt supply 400/120 = 3.33amps, fit a 5amp fuse
3
As watts are made of volts times amps, the answer would be 0.660kw.
volts, amps, watts
To find the voltage required for the flat-screen television, you can use the formula: Power (watts) = Voltage (volts) x Current (amps). Rearranging the formula gives you Voltage = Power / Current. Therefore, with a power rating of 300 watts and a current of 3 amps, the voltage needed is 300 watts / 3 amps = 100 volts.
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan