No. If you will have insulation around a can, make sure it is thermally protected.
Yes, all recessed lights have thermal protection, normally a bi-metal thermal overload. They must be to receive a U.L., (Underwriters Laboratories) approval sticker and be allowed to be sold in the U.S. The overload works on heat, not current, so that if you say put a 200 watt lamp into a fixture rated for 60 watt maximum, the overload will overheat and open the circuit.
No, the fluorescent fixtures that are installed in dropped ceilings are also know as recessed lighting.
All materials can be melted or thermally decomposed.
Canned lighting and recessed lighting are often used interchangeably, but there are some differences between the two. Canned lighting refers to the fixture itself, which is typically a cylindrical metal can that houses the light bulb. Recessed lighting, on the other hand, refers to the installation method where the light fixture is set into the ceiling, creating a seamless and flush appearance. In essence, all canned lighting is recessed, but not all recessed lighting is canned.
You can get them in trash yards where they put all the cans, plastic, and trash in.
Fine F-12 Some deeply recessed areas with detail, all lettering sharp Fine F-15 Slightly more detail in the recessed areas, all lettering sharp
You have to but all of the cans in walmart
All cans are metallic; they're composed of either steel or aluminum.
There are eight possible combinations... 1 row of 24 cans 2 rows of 12 cans 3 rows 8 cans 4 rows of 6 cans 6 rows of 4 cans 8 rows of 3 cans 12 rows of 2 cans 24 rows of 1 can
obviously yes. i dont know why this is even a question. All cans can can when given the chance. But more often than not cans cannot can cans because they are denied the opportunity to prove what cans can really do.
A can maker can make all the cans he can, 'cause a can maker can make cans. But if it's tin cans the can maker really wants to make, he'll hafta buy lots of steel.
Recessed lighting fixtures can take all sorts of bulb, including halogen and incandescent. Hire an electrician to install them as factors such as correct spacing between them are very important.