Yes, they are in fact very common in commercial buildings and are becoming more popular in custom homes. The thing is the floor box and cover plates are specialized and expensive. The plates are typically a brass alloy. You can check with someone like Home Depot but I don't know if they stock those parts.
I use a hammer from the floor to the bottom of the outlet. This equates to about 13". Usual construction specifications from the electrical engineers is 300mm or 12 inches to center of the device.
It would be impractical to mount them high upon the wall. The child would then just pull on the wire connected to the outlet. Besides modern outlets are childproof and are required in all new homes by the Electrical Code. Older outlets can be made childproof by installing a simple plastic cap.
There is no code ruling on this. I set mine 12" to center. If you are putting in a new outlet in an existing home I would suggest you just match it to the height of the rest of the outlets.
outlets thats one!
It may have tripped a spark gap or GFCI breaker.
No they do not have electrical outlets
Electrical outlets are wired in parallel.
Yes, electrical outlets can go under windows.
I use a hammer from the floor to the bottom of the outlet. This equates to about 13". Usual construction specifications from the electrical engineers is 300mm or 12 inches to center of the device.
The collective noun for retail outlets is a chain of outlets. The collective noun for electrical outlets is a bank of outlets.
When electrical outlets get old they tend to chip and crack. Also in older outlets the socket gets loose and the plug will not stay in the outlet.
copper
AC, alternating current is used to power electrical outlets in the U.S..
About 16 inches from the floor, that way it gives you about 5 inches to bend down into the box which is mounted at 12 inches.
No. The voltage is the same but you'll need an adaptator to use either the English or the European electrical outlets.
500mm from electrical outlets to gas ponit
Electrical outlets