answersLogoWhite

0


Best Answer

Surface area of an open pipe = 2*pi*radius*length or pi*diameter*length in square units.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Area o a pipe which is anopen cylinder?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What are the symptoms for fumes in car?

usually an exhaust leak under the hood(exhaust manifold or o ring/flex pipe that fastens to solid pipe).your car pulls air from the front windshield area,and it seeps into it and blows in


How did CY O' Connor die?

He shot himself after his pipe wouldn't work but after his death the pipe worked.


Which figure has 2 faces o edges and o vertices?

cylinder


Where does the o-ring go that came with the kit to replace a water pump in a 1990 KF Laser?

There is a pipe that goes into the pump. Put the 'O' ring on the pipe and push in


Are there any body parts beginning with o?

The oesophagus, your food pipe,


What is the area of O Vicedo?

The area of O Vicedo is 75.96 square kilometers.


What is the area of O Porriño?

The area of O Porriño is 62 square kilometers.


How do you change thermostat on 2000 satrn l s 3.0 engine?

If this is the 3.0 V6 engine (Saab) the coolant thermostat is located between the cylinder heads on the passenger side of the engine. The upper radiator hose connects to a split pipe that uses an O ring to seal the two segments. To get to the thermostat you must remove the intake manifold assembly, then remove a base plate below that. Prior to removing the top aluminum housing from the thermostat use a large wrench and separate the aluminum pipe leading from the top radiator hose to the theromostat into two sections. Place the wrench on the end where the upper radiator hose connects, and after removing the small bolt that holds the front pipe segment secure, twist the outer pipe out of the flange of the inner pipe. Then remove the two bolts holding the cover and inner pipe over the thermostat and remove the inner pipe and old thermostat. clean the area, replace with new thermostat and cover. An updated kit is available from Saturn with new thermostat, gasket, cover, and O ring.


What is the maximum possible clearance between shaft with radial O ring and cylinder to hold 5 bar hydrostatic pressure?

It depends on the diameters of the shaft and the O-ring. Whether or not it rotates, or slides, how many O-rings or seals are on the shaft, and the thickness of the cylinder head. Consult the manufacturer of the cylinder for the proper clearances required.


A drain pipe is to be laid between two points One point is 13 m higher in elevation than the other point The pipe is to slope at an 7.5 degrees with the horizontal Compute the length of the drain pipe?

Here we have a triangle with angle A 7.5deg and opposite side O 13m, and we're looking to find the hypotenuse H which would be the drain pipe. Remember sin A=O/H, so H=O/sinA. H=13/sin7.5= 99.6m


How many cornes does a cylinder have?

zeor o A BIG FAT 0


Where can one purchase a Dunhill pipe?

The best place to buy from would have to be Cup O' Joes, which is the United States' largest retailer of Dunhill pipes. At Cup O' Joes you can also buy whatever you need as an accessory for you Dunhill Pipe.