Multiply feet by 0.3048 to get meters.
You multiply the feet by 0.3048.
Square feet x 0.0929 = square metres
1 Meter is approximately 3 feet (a little over). There are 100 cm in a meter and 1000 mm in a meter. These are the basics.
1 square metre = 10.7639104 square foot
The conversion factor is approximately 10.764 square feet per square meter. This is derived from the conversion 1 meter = 3.2808399 feet.
You will have a gas meter to give this reading. If it doesn't give cubic feet directly it should have a conversion factor on the meter. So you just read the meter on the right days.
To calculate the area in square feet, first convert the dimensions from meters to feet. There are approximately 3.281 feet in a meter, so 10 meters is about 32.81 feet high and 18 meters is about 59.06 feet long. The area in square feet is then calculated as height multiplied by length: 32.81 feet × 59.06 feet, which equals approximately 1,936.57 square feet.
you can calculate a meter by using maybe a meter stick or a tape measure...
Meter's are bigger, 1 meter = 3.2808399 feet.
1 Meter = 3.2808399
meter is the unit of length ( one dimension) and square feet is ti unit of area two dimension... there is well the in one meter there are 100 centimeters and in one feet there are 30 so 1 meter is about 3 feet and 10 cm . to be exact 1 meter is 3.280 feetThere are no square feet in a meter. A meter is a unit of linear measure, whereas a square foot is a unit of area measurement. Its a little like saying "How many gallons in an volt." There are 10.76 square feet in a SQUARE meter, if that's what you were asking.
There are approximately 86.11 square feet in a roll of felt that is 8 meters x 1 meter. To calculate this, you would first convert the dimensions to feet (8 meters = 26.25 feet and 1 meter = 3.28 feet) and then multiply them (26.25 feet x 3.28 feet = 86.11 square feet).