0
The pull chain on the porcelain light fixture can be converted to a wall switch very easily. You will need to install a new two wire #14 cable from the box the fixture is mounted to now to the new wall switch box. Remove the power to the circuit by shutting that circuit's breaker off. The wire that is connected to the switch in the light fixture is the incoming "hot" wire. Disconnect it and re connect it to the black wire that goes down to the switch. Disconnect the white wire from the old porcelain fixture. For the installation of the porcelain fixture connect the white wire to the silver screw on the new fixture. Now connect the white wire that returns from the switch to the brass coloured screw on the new fixture. Mark this white wire with a small piece of black electrical tape to re identify it as not a neutral (code rule) but a potential "hot" wire. At the switch end make sure that the black wire is connected to the top screw and the re identified white wire (with a black tape marker) is connected to the bottom screw of the switch. Connect the ground wire in the cable to the new switch box and the existing fixture box. Install the switch making sure that the switch is in the off position and that the handle in facing downwards. Install switch plate cover, turn the breaker back on and you are finished. <><><> This project is relatively easy to do if there is already an existing wall box close to the pull-chain switch BUT ONLY if it already has the right wiring in it.
If there is no such wall box then a new one will have to be installed and wired. If you already know how to do that safely you would not be asking this question here!
For some relevant information, please see the related question below about replacing a wall switch by a pull switch. <><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
What else can I help you with?
How do you install pull chain switch into existing Fluorescent lamp?
Installing a pull chain switch into an existing fluorescent lamp includes both mechanical and electrical issues. One has to change the wires and the switch mounts to have the two be compatible within the same fixture.
How do you wire in a pull chain switch in a bathroom light fixture?
If you are adding the pull chain to an existing fixture then the pull chain switch should have two wires. Wire nut either one to the hot wire coming in and the other to the black wire of the fixture.
How do you add an outlet to a porch light?
how do you hook up an outlet to a pull chain light without the outlet shutting off when you pull string
What is the metal piece that connects pull chains together called?
A pull chain connector. really.Bead chain connector. See related links below.
What do isolated links on light fixture pull chains prevent?
They are the weakest link and will release the chain if pulled too hard. They keep you from breaking the original chain, some of which goes inside of the fan and very time consuming to fix.
How do you operate a pull switch ceiling light?
To operate a pull switch ceiling light, simply pull the attached cord or chain downwards to turn the light on. Pull the cord or chain again to turn the light off.
How does a pull chain light work and what are its main features?
A pull chain light works by using a chain that is connected to a switch inside the light fixture. When you pull the chain, it activates the switch, turning the light on or off. The main features of a pull chain light are its convenience in easily turning the light on and off without the need for a separate wall switch, and its simple and traditional design that is commonly found in older homes or in areas where a wall switch is not practical.
Why does your light not turn off?
Pertaining to what? A light switch, an oven light, a pull chain type lampholder....???
How do I replace a broken pull chain on a light fixture?
To replace a broken pull chain on a light fixture, you will need to turn off the power to the fixture, remove the old pull chain switch, and install a new one by connecting the wires according to the instructions provided with the new switch.
How can I replace a broken light pull chain in my ceiling fan?
To replace a broken light pull chain in your ceiling fan, you will need to turn off the power to the fan, remove the old pull chain switch, and install a new one by connecting the wires according to the instructions provided with the new switch.
How do I replace a broken pull chain on a pull chain ceiling light?
To replace a broken pull chain on a pull chain ceiling light, you will need to turn off the power to the light fixture, remove the old pull chain switch, and install a new one by connecting the wires according to the manufacturer's instructions. It is important to follow safety precautions and consult a professional if needed.
How can I fix the pull chain on my ceiling fan light?
To fix the pull chain on your ceiling fan light, you can start by turning off the power to the fan. Then, remove the light fixture cover and locate the pull chain switch. You may need to replace the switch if it is broken or damaged. You can find a replacement switch at a hardware store and follow the instructions to install it. Be sure to turn the power back on and test the new switch to ensure it is working properly.
How do pull chain lights work and what are some common features of pull chain lights?
Pull chain lights work by using a chain mechanism to turn the light on and off. When the chain is pulled, it activates a switch inside the light fixture that controls the flow of electricity to the light bulb. Common features of pull chain lights include a simple and convenient way to control the light without the need for a separate switch, a traditional and classic design that is often found in older homes or spaces, and the ability to be easily installed in areas where wiring for a wall switch may be difficult or costly.
How do you wire a pull switch on a hard wire ceiling light that has no switch?
Two options. Change the fixture to a keyed pull-chain, or add a pull-chain adapter to the existing fixture. Both available from Home Depot and others for about $3.
How can I fix a pull chain light that is not working properly?
To fix a pull chain light that is not working properly, you can try replacing the light bulb, checking the electrical connections, and replacing the pull chain switch if necessary. If these steps do not solve the issue, it may be best to consult a professional electrician for further assistance.
What is the wiring diagram for a ceiling fan pull chain light switch?
The wiring diagram for a ceiling fan pull chain light switch typically involves connecting the switch to the fan's light kit and power source. The switch is usually wired in series with the light kit, allowing it to control the light independently from the fan. It is important to follow the manufacturer's instructions and consult a professional if needed to ensure proper installation.
3 speed ceiling fan w light and pull chains single wall switch has blue for motor Tried black black blue and white white and both greens to bare etc Can get fan and light working but light stays on?
I had the same experience. If the fan turns on/off with its pull chain but the light doesn't, then the switch behind the light's pull-chain is broke and needs to be replaced.
