0
No, they would need to be bevel gears. Peg gear wheels would but they are generaly made from wood and used for agriculture etc.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Where do you find the word spur in the Bible?
where is the word spur in the bible
What does osteophytic mean?
Osteophyte means bone spur
Which of the following is a correctly written compound word 1 Thirty one 2 Self-evident 3 Quickly-running 4 Spur of the moment-decision?
The answer is self-evident.
How can you find the pitch circle diameter overall diameter and diametrical pitch of two gears working together?
I will start with the Formula for DP(diametral pitch) and PCD (pitch circle diam in Inches) Formula :- PCD = N/ DP (N is number of teeth) I will also assume that the gears are straight tooth gears (Spur Gears) First assume that the pitch circle is at a point half way between the crest and the root of the teeth (this is not true,but it is where we start to find what we want) Count the number of teeth in each gear. Suppose the result is 28 & 70 teeth. Now measure the exact distance between the very centre of the 2 gears, which is called the Centre Distance. Suppose the result is 3.5 inch. The individual PCD's will be in the ratio 28:70 which is the same as 2:5 The radii will of course also be in the ratio 2:5. Now 2 plus 5 equals 7, so this means that the 2 radii will be; 2/7 of 3.5 for the small gear, and 5/7 of 3.5 for the large gear. Result of these calculations is : Small Radii is exactly 1inch. Large radii is 2.5 inch. These 2 radii must total the distance between the centers of the 2gears, otherwise you have made an error. Now, the 2 PCD's will each be double the radii you calculated, so they will be , 2 inch and 5 inch. Now you can use these PCD's to calculate the Diametral Pitch of the gears. Use the formula I have given you up top. PCD = N/DP which is the same as DP = N / PCD so 28/ 2= 14. So DP is 14. Check using the large gear details, 70/5= 14 which is the same result so we know we are correct. Finally, the Addendum (distance between the Pich Circle and the Outer Diameter) Addendum = 1/DP = 1/14 = 0.071 Inch. The outer diameter of the gear will be it's Pitch Circle Diam PLUS 2 addendums = 2+ 0.142 = 2.142 Overall Diam for small gear and 5+ 0.142= 5.142 Inch Outer Diam for the larger gear. ALSO, there other types of Gear Pitch which are used. There is Circular Pitch and there is Module Pitch. Be sure that your gear does in fact have teeth which are Diametral Pitch, otherwise all these calculations will give the incorrect result. any factory which cuts gears will be able to check if your gears are DP or not. It is a job for specialists.
What could a lump be on the back of your neck bone on the right side?
Could be anything. Could be a muscle knot, could be a cyst, could be a benign growth of tissue, could be worse. Could be something else. Get to a doctor. You need someone with experience to examine it.AnswerIt could be a bone spur.
What is the difference between spur gears and other gears?
Spur gears are cut with straight teeth. They can only transmit rotation between parallel shafts, and are relatively economical. Bevel gears have teeth cut on an angle. They transmit rotation between non-parallel shafts. Helical gears have curved teeth. They are generally quieter than spur gears, but are generally more difficult to make and more expensive.
Is planetary gears used for spur gear?
Planetary gears can be spur or helical gears.
Why reverse gear is spur?
Reverse gear is spur because it has to slide, sliding mesh gearbox uses spur gears. Because if it was constant mesh gear (helical) it could not slide in and out, therefore it could not go in the opposite direction of rotation.
What disadvantages of spur gears?
Advantages - Spur gears are simplest, easiest to design and manufacture and disadvanages i dunno :)
Where spur gears are used?
spur gears are used because there are many things such as bicycles that cant exist without a spur gear' > gearboxes, mechanical watches, cam drives
Where are spur gears located on a car?
In the differential.
Where can spur gears be seen?
You can see them in industries...
What is the difference between helical gear and screw?
Spur gears have straight teeth while helical gears have curved teeth. Generally, helical gears are usually quieter and smoother in operation, while spur gears are easier to make and much less expensive.Helical gears are stronger than spur gears.
What is different between spur gear and worm gear?
Spur gears give 180 degree drive, and worm gears give 90 degree drive.
Why do they use spur cut gears in performance transmissions?
They don't. Most racing trans have straight cut gears. Spur cuts are a little easier to shift.
What is the type of gear used in watches?
Spur Gears.
What is the purpose of a spur gear?
One of the most common types of gears is the Spur Gear. They are most round with teeth along the edging. Spur Gears are used in oscillating sprinklers or fans, windup clocks, washing machines and dyers.
