Sure. Just cap it off with a wire nut.
Wire size is the gauge (thickness of wire) hazard is almost anything not wired correctly.
The recommended gauge of wire to use for a 12 or 14 gauge wire is typically 10 gauge wire.
You could be referring to anything from shotguns to steel plate, but I'll take a wild guess you are referring to wire gauge. 10 gauge wire is thicker than 12 gauge. If you were referring to something other than wire, write again and tell us what you are referring to.
My heat pump was professionally wired when built in 2004. Wire is No. 4 AWG with 80 amp breaker
Normally a new kitchen stove will require a 50 amp breaker wired with AWG # 6/3 with ground wire.
Yes, 8 gauge wire is thicker and stronger than 10 gauge wire. The lower the gauge number, the thicker the wire is. Therefore, 8 gauge weld wire fencing would be stronger and more durable than 10 gauge wire fencing.
The size of the wire is stated by its gauge under American Wire Gauge. Six gauge wire is size 6 AWG.
8 gauge wire is thicker than 10 gauge wire. In the American wire gauge (AWG) system, lower gauge numbers indicate thicker wire. Therefore, 8 gauge wire has a larger diameter and can carry more current than 10 gauge wire.
No, the higher gauge means a thinner wire.
12 gauge wire is used for household plugins, and 14 gauge wire is used for lights. So, 12 gauge is the size to use. But since a freezer has an electric motor, it is best to not plug anything else with a motor into the same circuit.
Most motors aren't wired with solid wire. Typically only alternators or electric motors have solid wire.
Yes, the smaller gauge number, the larger the wire is.