yes
remove the metal hinge or use a machete :)
Remove batt cable, wires from back, Remove bolts at 6 & 12 o' clock.
Sometimes you can remove the back seat and access it that way.
it is in side the pan you have to remove it to get to the filter and yes it is a back bracker
You will need to remove the inside door panel. Remove the door handle retaining screws. Remove the linkage from the back of the door handle.
pull the back leaver forward and slowly lift with 10 people
No
how do i remove the radio on the 96 Honda odyssey
On a 96 beretta there are 2 bolts just under the front edge of the seat. Then after you remove the seat bottom there are 2 torx bolts (don't remember the size)holding the seat back and seat belts. After you remove the 2 torx bolts then you pull the seat back up to unhook the top of the seat back. torx T50
remove interior door panel, remove 2-4 speed nuts at back of door handle & the main linkage bar, it should come off.
remove pass.side kick panel on back wall. If it the same as 96 xj6
no