Answer for USA, Canada and countries running a 60 Hz supply service.
This is very common in commercial and industrial installations. You must be sure that your two breakers are fed from different phases or legs of your electrical service. Having both circuits fed from the same phase or leg might cause the neutral to melt and cause a fire without tripping any breakers.
<><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
it would be a reverberating circuit
It is a bundle of neurons, all flowing from the same general source (the eye) to the optic chiasm.
No, a breaker is designed to handle the load of only one circuit. Connecting two circuits to one breaker can overload the circuit and potentially lead to electrical hazards such as overheating, tripping the breaker, or causing a fire. Each circuit must have its own dedicated breaker.
yes we can use as a single phase circuit because at practise directly the 3-phase circuit is made by combining the three single phase circuits
A line thermostat on a 240 volt heater must open both of the supply lines that feed the heater. This is where the double pole thermostat is used. On 120 volt heaters only one hot line needs to be opened to shut the supply off from the source therefore a single pole thermostat is used.
Spaced practice is a technique where students learn a single topic in different sessions instead of learning it in a long single session.
A series is an electric circuit with a single path.A parallel circuit is an electric circuit with multiple paths.
We can do wiring in staircase by two different circuits.(i.e. R or Y or B).
All motor circuits require protection against single-phasing.
The stele.
you are stronger together than alone
The bundle system of production, where one or more workers performed a single operation on a repetitive basis. Once the bundle limit was reached, the work in process was passed on to the next station of workers.
Check continuity
Yes, there is a difference between single phase and three phase circuits.
Components connected in series are connected along a single path, so the same current flows through all of the components.Components connected in parallel are connected so the same voltage is applied to each component
a circuit in which secondary coil alone is tuned
It is a promotional offer that is used by stores to sell products, specifically ps3s. The bundle usually consists of a ps3 console controllers and/or a few video games. It usually works out cheaper if you buy a bundle as opposed to a single ps3 console.