0
What else can I help you with?
What happens when you use a higher wattage metal halide bulb?
It uses more power (watts) than before, it produces more heat, and also more light.
How many leds and watts to replace a 250 watt metal halide?
It depends. The Wattage ratings do not indicate how bright any type of bulb is, just what its power consumption is. In general LED lamps put out more light for the power used than metal halide bulbs, but there is no standard as to how much more. Most lamps indicate their candlepower or 'candela' ratings on the package, and the vary by type of bulb and manufacturer. The 'candela' is the SI base unit of luminous intensity.
How many 400 watt metal halide lamps will operate off a 1000 watt ballast?
It will power two 400 watt lamps.
How do you rewire a 400 watt metal halide shop light to run on 110?
400w is the power 110 is the voltage. Is your light using 110v already or 220v? Believe you are already running at 110 and u don't understand electrical terms. Perhaps you should call an electrician
What would be the cost of operating 60 1000watt Metal Halide lamps for 10 hr?
To find out the cost of operating 60 1000watt Metal Halide lamps for 10 hours, you multiply the amount of power (in kilowatts) by time and hours. That will give you kWh (kilowatt hours), then you find out how much your power costs in $/kWh, then divide the kilowatt hours you are using by the cost ($/kWh).
How do you ignite a 400w electronic metal halide or high pressure sodium bulb?
To ignite a 400W electronic metal halide or high pressure sodium bulb, you need to ensure that the power supply is connected and turned on. These bulbs require a ballast to regulate the electrical current, so make sure the ballast is functioning properly. Once everything is set up, simply turn on the power switch, and the bulb should ignite.
Why is the outside light not working even though it has power?
The outside light may not be working even though it has power due to a faulty bulb, a damaged fixture, or a problem with the wiring. It is recommended to check these components to determine the cause of the issue.
How does a light bulb light?
light bulbs have metal contacts that connect to an electrical circuit and a filament. power lights up the filament in the bulb .
What is the difference between capacitor and an ignitor in metal halide lamp?
A capacitor in a metal halide lamp is used to improve power factor and stabilize voltage, helping to ensure efficient operation of the lamp. In contrast, an ignitor is a device that provides a high-voltage pulse to initiate the lamp's arc, enabling it to start. While the capacitor aids in the ongoing operation of the lamp, the ignitor's primary function is to facilitate the initial ignition process. Thus, they serve distinct roles in the lamp's overall functionality.
How do you change operating voltage of metal halide lamp from 240 to 120?
You would need to use a transformer to step down the voltage from 240V to 120V. Make sure to select a transformer that is rated for the power consumption of the metal halide lamp and have a qualified electrician perform the installation to ensure safety and proper operation.
What type of band is nightwish?
They are a Power Metal and Symphonic Metal band.
Is it safe to remove a metal part of a light bulb that is stuck in the socket?
No, it is not safe to remove a metal part of a light bulb that is stuck in the socket. It is recommended to turn off the power and seek professional help to avoid the risk of electric shock or injury.
