Just simply, connect all the black wires to the black wire coming out of the connector, and all the white wires to the white wire coming out of the connected. Use the blocks with screw in to connect them (pick them up from most car accessories shops like halfords, wilcos....etc).
Green is ground and white is neutral.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
It means that the wires has different colors on it. I have an awkward family
Black represents Hot and White common. For the light to operate it needs a white and black wires. The switch box has two cables with a white and black wire plus a ground. One wire is from the supply and the other to the light. Connecting the whites just provides common directly to the light. The blacks go into and out of switch because it is the hot side that is being switched.
I am guessing that your 3 wires are black (hot), white (neutral) and bare or green wire (ground). Connect black to black, white to white and ground wire to the metal case of swag kit.
Green is ground and white is neutral.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
by connecting it with the red + black wires
Red= 12v Hot & Black is ground.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
More information is needed as to what device you are connecting to what power supply. The only two identifiable wires are the white and green. In North America the white colour is used for the circuit's neutral and the green is used for grounding of devices.
It means that the wires has different colors on it. I have an awkward family
Black represents Hot and White common. For the light to operate it needs a white and black wires. The switch box has two cables with a white and black wire plus a ground. One wire is from the supply and the other to the light. Connecting the whites just provides common directly to the light. The blacks go into and out of switch because it is the hot side that is being switched.
Inside the computer, the various ground wires are black. Computers use direct current inside. The wiring color differs from AC, where both red and black wires are hot wires, white is neutral, and green or bare is ground. In a computer, the red and yellow wires are positive wires of different voltages.
I am guessing that your 3 wires are black (hot), white (neutral) and bare or green wire (ground). Connect black to black, white to white and ground wire to the metal case of swag kit.
There is 220 volts between the two poles. If you are running 2 wires (black and white) + ground then you hook black to one pole and white to the other. Put red or black electric tape on each end of the white wire and wrap around wire for 3 inches or so next to the connection so the next person will be able to see that the wire is hot and not a neutral.