Study guides

☆☆

Q: Convert a volume of 1.84 cubic inches into cubic centimeters and cubic meters?

Write your answer...

Submit

Still have questions?

Related questions

Volume in cubic centimetres = (Volume in cubic meters)/106

Liters and kiloliters are used to measure volume; meters and centimeters are used to measure length. You don't convert those.Liters and kiloliters are used to measure volume; meters and centimeters are used to measure length. You don't convert those.Liters and kiloliters are used to measure volume; meters and centimeters are used to measure length. You don't convert those.Liters and kiloliters are used to measure volume; meters and centimeters are used to measure length. You don't convert those.

Cubic inches x 0.0000164 = approximate cubic meters

If you have three measurements of length (meters, centimeters, millimeters) and you multiply them together, you will end up with a measure of volume (liters). Of course, if you were to actually do this, you would want to convert all of the lengths into a common unit (convert centimeters and millimeters to meters or convert meters and centimeters to millimeters).

471,240 cubic inches equates to about eight(7.72224004) cubic meters.

You can't convert a unit of volume to a unit of length.

You don't, any more than you can convert applesauce into oranges. Cubic centimeters are volume (units3), while m2 are area.

Cubic centimeters measure volume and inches measure length. You cannot convert between the two.

If that's a rectangular block, just multiply the three numbers. The volume, of course, will be in cubic centimeters. If you first convert the sizes to decimeters, the answer will be in cubic centimeters, which is the same as liters. If you first convert the sizes to meters, the answer will be in cubic meters.

85.5 square meters times 0.05 meters is a volume of 4.275 cubic meters.

You can not convert a cubic value (a volume) to a linear value (a length) ie cubic meters into cementers.

No, meters are the fundamental unit of length in the metric system, equal to 100 centimeters or approximately 39.37 inches.

Multiply any number of cubic meters by 1 million to get the same volume in cubic centimeters.

The area 90 square meters times 0.075 meters gives a volume of 6.75 cubic meters.

The area 90 square meters times 0.075 meters gives a volume of 6.75 cubic meters.

1000 cubic centimeters is a measure of volume; the only "exact equivalant in volume" possible would be in another measure of volume, such as cubic inches, cubic feet, cubic meters, etc.

The question cannot be answered as posed. Meters are a length. Cubic centimeters are a volume. The two units are different dimensions. The question is akin to asking to convert miles to degrees Fahrenheit. On the off chance that the intended question was converting cubic meters to cubic centimeters, 1 m3 = 106 cm3

No.

Cubic meters are a measure of volume. The volume of a cube is simply the product of multiplying the length of its sides. Depending on the units you need for the answer, you would either convert the measurements in meters to inches, or the measurement in inches to meters. It would probably be best to convert the thickness measurement into meters. Then multiply the 3 lengths together, and that is your product. Convert to meters from inches: 1 inch x (1 cm/2.54 in) x (1 meter/1000 cm)

Not possible to convert an area to a volume!!!

Centimeters are units of length and cubic inches are units of volume. One cannot be converted into the other.

By "cbm" I'm assuming you mean, "cubic meters". First, you have to convert inches to meters. One inch = 0.0254 meters. So: 16 inches = 16 * 0.0254 meters 16 inches = 0.4064 meters 20 inches = 20 * 0.0254 meters 20 inches = 0.508 meters Now you use those numbers to calculate the volume of the drum in cubic meters: Volume = (pi * Radius^2) * Length (Note: ^ means to the power of) Length is 0.508 meters. Radius is 1/2 diameter, or 0.4064/2 = 0.2032. Volume = (pi * 0.2032^2) * 0.508 Volume = (3.14159 * 0.2032^2) * 0.508 Volume = (3.14159 * 0.04129) * 0.508 Volume = (0.129717) * 0.508 Volume = 0.065896 Answer: 0.065896 cubic meters or about 66/1000 of a cubic meter

Divide the volume in cm3 by 1 000 000 so the answer is 0.225 cubic metres.

You don't. Those measurements measure completely different - and incompatible - things.Centimeters are a unit of length, and as such can be converted to other units of length, such as millimeters, meters, inches, feet, etc.Cubic centimeters are a unit of volume, and can be converted to things like cubic inches, cubic feet, cubic meters, liters, gallons, etc.There are also square centimeters, which are units of area, and are convertible with square meters, square feet, acres, etc.it is just too easy

You cannot convert cubed inches to inches. Cubic inches are units of volume and inches are units of length.