Best Answer

None, since there can be no conversion. An inch is a measure of length in 1-dimensional space while a cubic foot is a measure of volume in 3-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.

One inch of water over an area of 1728 square inches, is one cubic foot.

Q: Convert inches of water to standard cubic feet?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

71400 cubic inches of water weighs approx 11466 Newtons.

Convert everything to feet, then use the formula for the volume of a cylinder. Since the answer will be in cubic feet, you'll then have to convert it to gallons.

48 * 54 * 54 = 131220 cubic inches.48 * 54 * 54 = 131220 cubic inches.48 * 54 * 54 = 131220 cubic inches.48 * 54 * 54 = 131220 cubic inches.

1.377313489 US gallons. Convert all dimensions to inches and use cylinder volume formula pi * radius * radius * length. Multiply that answer by the conversion factor of 0.00433 to convert cubic inches to US gallons.

inches of water to scfm ( 3.5inhg to scfm

Related questions

No, standard cubic feet per minute (SCFM) is a measure of gas flow rate, while inches of water is a unit of pressure. The two units cannot be directly converted into each other as they measure different physical quantities.

To convert pounds (lb) to cubic inches (in³), you need the density of the material. The conversion is based on the formula: 1 pound = 27.68 cubic inches for water (density = 62.4 lb/ft³). So for 194 lbs, the volume in cubic inches would be 194 * 27.68 = 5,366.72 in³ if it were water.

To convert cubic inches to gallons, divide the volume in cubic inches by 231. This gives you the equivalent volume in gallons. In this case, a glass aquarium with a volume of 2315.52 cubic inches will hold approximately 10 gallons of water.

To convert cubic inches to gallons, first find the volume in cubic inches by multiplying the length, width, and height (30 x 18 x 6 = 3240 cubic inches). Then, divide the cubic inches by 231 to convert to gallons (3240 / 231 = 14.03 gallons).

There are approximately 5.9 liters in 360 cubic inches.

There are 17.66 gallons in 4,080 cubic inches of water.

25,773

There are approximately 59.43 fluid ounces in 92 cubic inches, assuming we are talking about water. This conversion is based on the standard conversion of 1 cubic inch being equal to 0.554 fluid ounces.

First convert all units to the same units - everything to inches, or everything to feet. Then use the formula for a cylinder to calculate the volume, which will be in cubic inches, or cubic feet. Finally you'll have to convert that to gallons.

its 7.48 gallons of water per cubic foot, so calculate your cubic feet then times it by 7.48, but dont forget that that is in cubic FEET, not inches, plugging in the numbers given will give you cubic inches, the best thing to do is to convert the 6" into feet, then do your calculations

To convert cubic feet of snow to gallons of water, you need to consider the density of snow. Snow typically has a density of about 10% of water, so you can multiply the cubic feet of snow by 0.1 to get the cubic feet of water, and then multiply by 7.48 to convert to gallons.

There are 12 inches in each foot. A cubic foot contains 12^3 or 1728 cubic inches of any substance. So there are 1728 inches of water in one cubic foot.