Best Answer

Nice data. What's your question ?

Could you possibly be asking for the frequency ???

Xc = 1 / (2 pi f C)

f = 1 / (2 pi Xc C)

= 106 / (2 pi Xc 0.15)

= 106 / (600.264)

= 1665.9 Hz (rounded)

Q: Ct equals .15uf Xc equals 636.9 ohms?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

one egg equals 2 oz. so 144 Ct * 2 oz. = 288 oz.

Sales tax on 2,500 dollars in Ct.

CT is the abreviation for carats. This weighing unit is used for weighing diamonds and other gemstones.

ct

Contractualactoractualaffectionattractiveauctionbacteriacompunctionconnectionconcoctionconductorconstructioncorrectionconvictiondeductiondefectivedistinctioneffectivefactualfractionfracturefrictionfunctionineffectualintellectualinfractioninfectedinstinctivelyjunctionlactationnocturnaloverreactionpicturepuncturereactivereductionreflectionresurrectionsanctionstructionsuctiontraction

Related questions

The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.

ZT=1/3 of CT. Therefore, CT=5

the amazon equals the copy ct which means

11 Players in a Cricket Team

one egg equals 2 oz. so 144 Ct * 2 oz. = 288 oz.

The letters CT stand for carat, the weight measurement for diamonds. One full carat -- 1.00 CT -- weighs .02 grammes. A diamond weighing 0.010 carat equals one one-hundredth of a carat.

By multiplying the weight of gold in 24Ct With 1.084 to convert it to 22 ct eg:- 33gm gold of purity 24ct is equals to 35.772 gm of gold with purity 22 ct

ArkansasUTC-06 CT IllinoisUTC-06 CT IowaUTC-06 CT LouisianaUTC-06 CT MinnesotaUTC-06 CT MississippiUTC-06 CT MissouriUTC-06 CT OklahomaUTC-06 CT WisconsinUTC-06 CT

ct

The air distance from Liverpool, England, to Waterbury, Connecticut, is 3,241 miles. That equals 5,215 kilometers or 2,816 nautical miles.

You mean CT. CT means Connecticut the abbreviation for Connecticut is CT get it?

CT (current transformer) Burden is the maximum load that the CT secondary can drive (e.g. meters or protection relays) Why do you care about burden when ordering current transformers? The burden is the termination impedance of the measuring instrument. The measuring instrument can be an analog or digital energy meter, a data logger or a recorder. All instruments that use a current transformer to measure line current must terminate the CT with a resistance (impedance in same case which means there is some inductance involved). A CT supplier should be given the burden when ordering. Technically, the total burden for a CT is the internal winding resistance, the connecting lead resistance and the measuring instrument input resistance. Some Ct's are installed a long distance from the measuring instrument and the connecting leads can have a resistance as much as 0.002 ohms per foot (both ways because the current makes a complete round trip). This resistance will cause an error if not taken into account.