Want this question answered?
First you measure the width and then the lenght then multiply it. length times width.
appropriate unit to measure the width of a textbook = ce ntimeters
A tape measure
with a tape measure. the CSA
In a rectangle,the longest side(bottom) is always the length.The width is always the shorter one.
measure it
measure them.
-- Measure the height.-- Measure the width at the top.-- Measure the width at the bottom.Area = (1/2) x (height) x (width-at-the-top plus width-at-the-bottom)
Given what? Probably measure it
Width refers to the base of a geometric shape. Height is from top to bottom, while length and width, which are interchangable, are strictly side to side on the bottom.
First you measure the width and then the lenght then multiply it. length times width.
A gutters girth is determined by measuring the total width of the strip (galvanized steel, copper, etc.) from which a specific profile is rolled. For instance, to figure the girth for an ogee gutter you would need to calculate the TOTAL perimeter to determine the girth. If using a half round gutter you would need to determine the circumference plus the width of any rolled edges or flanges.
you should measure bothe the height and width of the space in inches.
If it's rectangular, you multiply length x width. So yes, in that case you need to determine both measurements - for example length and width.
You should measure the height and the width of the smace in inches.
You should definately measure the space that you have to work with.
A tornado's width is measured at bottom, usually by the width of the damage path.