0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
You need to buy fertilizer for a flower bed with a diameter of 13 feet if one bag covers 10 square feet how many bags do you need to buy?
You need to buy 14 bags.area = pi * (13/2)^2 = 132.73... ft2
I need your help which camera to buy?
i recommend canon a650
When do you need to find perimeter?
You need to find perimeter when you buy a house, because then you know where your yard begins and ends.
How much per month is homeschooling?
Homeschooling is free! But you have to buy the supplies you need.
Can you buy a lubrecant at 15?
Yes you can. They dont need id to be bought. Forplay is better for making her wet.
How can you make your 120 snowmobile faster without taking off the governor or making it to fast?
You can put a bigger sprocket in it but you might need to buy a better chain to.
If you have a 12t back sprocket and you want to go down to a 8t what else would you have to buy?
shorter chain
Verde eon which has a 32t sprocket if you wanted to buy a smaller sprocket 25t what else do you have to buy?
if you are looking for a 25t sprocket then you need a 9t rear driver other wise it going to feel like you a pedaling forever and not going anywhere there are websites or just look online for proper bmx gearing ratio's also you may need spacers for your cranks
How do you put a small sprocket on a big sprocket bike on a BMX bike?
You can't put one sprocket on top of another, you have to remove what's there and then install another one. Depending on how much you change in size, you may have to adjust the length of the chain too. There are a couple of different versions of how the sprocket attaches, so make sure to figure out which one you need before you go and buy anything. Removal/assembly may require special tools, so it might be best to bring the bike to a shop.
How do you change the front sprocket raptor 660?
straighten the bent washer, Did you buy spare lock washers? remove the nut, 1-1/4" or 32 mm, I stand on the rear brake loosen the chain adjustment work the front sprocket out if the chain, it's tougher with a 14 tooth install new sprocket Don't forget to bend the washer back over the nut if you have the stock chain it might not have a master link so i cut mine but there is a way to take it off without cutting .
Can you put a 23 tooth sprocket on a mongoose bmx bike?
Not a sprocket only, but you can buy a 23-tooth freewheel that should fit.
What is a logical chain?
A logical chain is a series of random events that at the end can be concluded into a bigger idea.If i go to the mall, then i will buy a shirtIf i buy a shirt, the i will wear it to schoolif i wear it to school, i will get compliments,therefore if i go to the mall, i will get compliments
How can I turn my vintage road bike into a fixed gear?
Buy a rear wheel that can take a fixed sprocket. Mak sure the spacing fits your frame width. Tinker with your crank and/or the wheel centering to get a good chain line. Install new chain. remove derailers. Ride.
Does a 25t sprocket fit a 3 piece?
Yes Pretty much all 3 piece cranks should fit any sprocket you buy for them.
How many links are in a mongoose model 270 bmx bikes chain?
Good bikes are made in different frame sizes. And dedicated riders often chainge the gearing ratio by replacing either the sprocket or the driver with one with another tooth count than it came with. These things influence chain length, so you see that no one can tell how many links your chain should be. Chains are just about Always bought a Little long, then cut to length on the bike. Faster than counting links. Chain breakers aren't expensive. Either have a shop fit the chain when you buy it, or get a chain breaker (and a quicklink) and fit it yourself. Do note that chain, driver and sprocket wear together, but usually the chain wears the fastest. So sticking a new chain on old sprockets can often lead to the chain skipping and slipping. If you don't know how to measure a chain for wear, better replace aat least chain and driver at the same time.
Can you buy several pendants for one chain?
YOU CAN BUY SEVERAL PENDANTS FOR ONE CHAIN
What size free wheel do you need for a 28t sprocket?
It's much more about the hub than it is about the wheel, and fortunately the threading on freewheel hubs is fairly consistent. Simply buy a freewheel that has a 28t sprocket in there and you should be good to go. Freewheels are just about "never" disassembled, but ridden as a unit till they're worn out.
