Yes, if you rotate something you are only turning it, you are not affecting its size.
A degree is a measure of rotation, a foot is a measure of distance. These two are incomparable.
The arm is perpendicular to the axis of rotation. If you look at the axis along its axis it is only a point. The torque is force times distance tot that point
There can be no equivalence. A kilometre is a measure of linear displacement while a degree [rotation] is a measure of angular displacement. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed. For any angular rotation, the linear displacement is directly proportional to the distance from the centre of rotation.
once per wheel rotation of tire. measure the diameter and X 3.14 equals distance traveled in one rotation. 60 mph x5280 ft per mile=316800 ft. divide that by distance travelled per rotation and you have it. measured in RPM.
Torque is the force that produces or tends to produce rotation or torsion in an object. It is a measure of the twisting or turning force applied to an object. Torque is calculated as the product of the force and the distance from the point of rotation.
the answer is twice. the angle of rotation is twice the measure
G is a measure of linear acceleration. For rotational motion it is necessary to multiply the degrees by the distance from the centre of rotation (radius of rotation).
An inch is a measure of linear displacement (distance) while a degree is a measure of angular displacement (rotation). There is no constant relationship between the two. The same angular displacement will result in a bigger linear displacement the further you are from the centre of rotation.
The measure of how effectively a force causes rotation is torque. Torque is the product of the force applied and the distance from the pivot point to the point where the force is applied. It is a vector quantity that describes the tendency of a force to rotate an object around an axis.
Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.Nothing.Inches are a measure of distance, not weight.
measure the angels of rotation.
When driving, you should always measure your following distance in seconds. A general rule of thumb is to maintain a following distance of at least 3-4 seconds between your vehicle and the one in front of you. This distance allows you enough time to react and brake safely in case of an emergency.