You would set up a proportion and cross multiply. 12 inches over 1 foot is equal to x inches over 96 feet. Cross multiply to get 1152 inches.
144 square feet.
There are 12 inches in one foot. Therefore, 96 inches is equal to 96/12 = 8 feet.
There are 12 inches in one foot, so 100 feet = 1200 inches.
To convert inches to feet just divide by 12 (since there are 12 inches per foot) -96 / 12 = 8 feet
To convert the dimensions from inches to feet, divide each by 12. So, 48 inches is 4 feet and 96 inches is 8 feet. The area in square feet is then calculated by multiplying these dimensions: 4 feet x 8 feet = 32 square feet.
Convert all units into feet or inches: 8 feet = 96 inches Volume = pi*32*96 = 2714.336053 or about 2714 cubic inches
To convert 1 meter 96 centimeters to feet, first convert the total measurement to centimeters (196 cm). Then, divide by 2.54 to convert to inches (77.17 inches). Finally, divide the total inches by 12 to get the feet and inches. This would be approximately 6 feet 5 inches.
Yes, 8 feet is greater than 100 inches. To compare the two, convert 8 feet to inches: 8 feet equals 96 inches (since 1 foot is 12 inches). Therefore, 96 inches is less than 100 inches.
To convert feet into inches, you multiply the number of feet by 12, since there are 12 inches in a foot. Therefore, 8 feet is equal to 8 x 12, which equals 96 inches.
The simplest way to answer a question like this is to convert the inch measurements to feet and then multiply. Dividing each measurement by 12 will convert inches to feet. Then multiplying length by width gives you the actual square footage. IE: 84/12=7 96/12=8 7x8=56 56 Square Feet
1 foot = 12 inches; (96 inches)/(12 inches)*(1 foot) = 8 feet
There are 12 inches in one foot, so 8 feet=96 inches