answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Formula for calculating critical speed of fan?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

8 system 3 fan 20 bulbs 1 laptop What is the formula for calculating ups?

Not enough information. Length of UPS run time required.


How regulator control the speed of fan?

Fan regulators are similar to light dimmers. Their function is to control the speed of the fan. The regulator uses resistances for the speed of the fan. It acts as a divider and the speed changes based on the resistance.


High speed fan relay?

same as low speed relay its call fan mode


How many speed settings does this fan have?

This fan has three speed settings, low, medium and high.


What is the speed for processor fan?

cpu fan speed of 3590 RPM normal(CPU 73c)


How a fan's speed varied?

with a variable speed switch


What is the problem when the AC Fan on my 1999 Ford E150 only blows on low and changing the fan speed setting has no effect on the fan speed?

Could be a bad fan motor resistor


How many speed settings are on this Wall mount fan?

There are three speed settings for this fan and it rotates 90 degress.


Replaced heater fan multi speed in 1992 Olds 88 When turn car off the fan still runs Is it not hooked up properly. I replaced the heater fan itself.?

now when you say replaced heater fan multi speed are talking the fan or the switch because ther is a fan speed resitor that can go bad and fan only works on high speed which can cause conector to get very hot and cause insolation on the wires to melt and cause a short in the harness making fan run constantly.


Where is the high speed fan relay for a 1998 Plymouth breeze?

There should be a smaller plastic box behind the fuse box in the engine compartment. There you will find the high speed fan relay as well as the low speed fan relay.Good Luck


Fan speed controls not working on a citroen dispatch van why?

no need to check, just replace the whole fan that has a little control module in the fan itself to control the speed as well


A fan or cooler relay is used in electric furnace to change the blower speed to the speed for cooling?

A fan or cooler relay is used in electrical furnace to change the blower speed to the blank speed for cooling