Quicksand
reduce something is to make the amount of something smaller. For example you can reduce your electric bill by unplugging the refrigerator.
To reduce a number by 1/10, you could use it as a percentage 10%. Example 250 reduced by 1/10 = 250 x 10% = 25
It's speed will reduce to to friction by gravity.
It is not always important. In chemistry, for example, you would never reduce C2H2 (acytelene) and C6H6 (benzene) to CH.
They are equivalent fractions as for example 9/12 can be reduced to 3/4
That depends on the experimental conditions.In a situation of constant pressure, the density will also be constant.In a situation of constant volume, reducing the amount of gas will reduce both pressure and density.
Flabby tyres produce more friction with the road.Less air pressure creates more surface friction, the less surface friction there is the better. (Example look at the very skinny narrow tyres on road racers as they don't need a lot of surface friction while mountain bikes have thick tyres as they need more friction)
By decreasing the pressure or using impure water.
A pressure gauge simply measures and visibly indicates pressure in a system . It does not reduce the pressure. For that you need a PRV (pressure reduction valve ).
it will spread it out across the large surface area therefore decreasing it. hope that helps! :)
yes it can also reduce friction especially when its slippery, cleats reduce the surface area that are in contact between the shoes and the ground surface?
By lubricating it or adding oil to the surface.
Surfactants, which are usually amphiphilic molecules, are used to reduce surface tension.
An oil reduce evaporation.
When you 'suck' on a straw, you reduce the air pressure inside it. This means the air pressure on the surface of the liquid outside the straw is greater - so it pushes down, which forces liquid up the straw into your mouth.
Flabby tyres produce more friction with the road.Less air pressure creates more surface friction, the less surface friction there is the better. (Example look at the very skinny narrow tyres on road racers as they don't need a lot of surface friction while mountain bikes have thick tyres as they need more friction)
we can reduce boiler pressure from 8 kg to 6kg by providing pressure reducing valve that is PRV