0
What else can I help you with?
Anyone know Location of blower motor relayfuse in the 98 Deville's There's power to the red wire none to the white wire connector to blower?
the white wire is the speed control circut the blower motor is bad.
Where is iac motor location 2000 dodge 3.3 v6 caravan?
It is the 4 wire item on the throttle body.
Which is no 1 plug on 2.2 5 s Camry motor?
Standing at the front of the car the number 1 cylinder is the first on the left. The plug wire will connect to the 3rd location, from the front, on the distributor cap.
1976 dodge 318 oil pressure sensor location?
Behind carb. at rear of motor with little wire going to it.
Selection of enameled wire for motor?
Selection of enameled wire for motor
Why will the Window not come up?
wire lose? bad motor if its power. could be a number of things. do you hear the motor if it is a power window?
When does a motor not need a neutral wire?
If the motor is operated from a three phase three wire distribution system the motor will not need a neutral wire.
Chevy silverado blower motor resistor location?
It is located on the passenger side below the dash. A 7-wire harness goes to it. It is next to the blower motor, which is circular in shape.
Location of oil pressure switch on a 1986 Honda prelude 2.0 motor?
on top of oil filter plate it has one wire
Location of oil pressure sensor?
On the top of the back of the motor. Just a little to the driver's side of the distributor. Its got a wire clipped to it.
Can a bad circuit breaker on a 3 phase motor cause the motor to run backwards?
No. If the motor runs backwards, swap any two phases to reverse the rotation, like this: Old wiring: phase A - brown wire - motor lead T1 phase B - yellow wire - motor lead T2 phase C - orange wire - motor lead T3 New wiring: phase A - brown wire - motor lead T2 phase B - yellow wire - motor lead T1 phase C - orange wire - motor lead T3
What wire do you use to upgrade to a newer gm tbi motor?
When upgrading your General Motor tbi motor you are upgrading more than just one wire. To upgrade a motor it usually requires changing out the whole motor and not just one wire.
