50/1000 inches in fraction form /
50/1000 = 5/100 = 1/20 = 0.05 in decimal form
To write 15 thousandths of an inch as a decimal, you need to divide 15 by 1000 since there are 1000 thousandths in an inch. The result is 0.015, which represents 15 thousandths of an inch in decimal form.
To express 1 inch and 10 thousandths in decimal form, you write it as 1.010. The "1" represents the whole inch, and the ".010" indicates the additional ten thousandths of an inch.
10 thousandths = 0.010
It is 0.0015 inches.
To write 250 thousandths of an inch, you can express it as a decimal: 0.250 inches. Alternatively, you can also represent it as a fraction: 250/1000, which simplifies to 1/4 inch.
To write two thousandth of an inch as a decimal, you would divide 1 by 2000, which equals 0.0005. This is because there are 1000 thousandths in an inch, so two thousandths would be half of that. Therefore, two thousandth of an inch written as a decimal is 0.0005.
Seven hundred five thousandths of an inch in decimal form is written as 0.705. This is derived from the whole number seven hundred (700) and the fractional part five thousandths (0.005), combining them to form 0.705.
Technically, the way the question is written, we can't tell whether you mean 0.700 or 0.00007 Assuming this is a tolerance specification in a machine shop or similar, it's probably stated in 'thousandths' of an inch, so the decimal is 0.700 inch
0.03 inch
The thousandths place is the 3rd digit to the right of the decimal point. So 0.004" (where the " symbol means inches)
You would not use the terminology 1 1/2 thousandths but 15 ten-thousandths, which is written as 0.0015 in numerals. 15/10000 inch = 0.0015 inches
0.000 002 inch(es).