2000 lbs
10 imperial pounds, 8.35 US pounds. It is the weight of 1 gallon of water.
Use this conversion: pounds x 453.9 = grams
For converting milligrams to pound, we use the following formula: Pound = mg รท 453,592.37 Thus, divide the value of milligrams by 453,592.37
About 8.53 pounds.
1 ton of steam. how much steam is vague question. steam can be at different pressures and saturations. At 212°F, 14.7 psia, liquid water has a specific volume of 0.016716 ft3/lbm and steam has a specfic volume of 26.80 3/lbm, which is a volume ratio of ~1603 : 1 of steam:water.
The density of water is 1 gram per millilitre. That means this sample of water is 720 grams. Converting that to pounds, that is 1.587 pounds.
10 imperial pounds, 8.35 US pounds. It is the weight of 1 gallon of water.
You can boil it or steam it. To boil it, bring water in a large pot to a rolling boil and add about 1 tablespoon salt per quart of water. Put the lobsters in claws first and begin timing from the moment the water comes back to a boil. To steam lobsters, cook them, covered, in a steamer basket above boiling water. They will need 1 to 2 minutes less, as the steam is hotter than boiling water. For 1 pound: 5 minutes 1 1/8 pounds: 6 minutes 1 1/4 pounds: 8 minutes 1 1/2 to 2 pounds: 8 to 10 minutes more than 2 pounds : 12 minutes You can boil it or steam it. To boil it, bring water in a large pot to a rolling boil and add about 1 tablespoon salt per quart of water. Put the lobsters in claws first and begin timing from the moment the water comes back to a boil. To steam lobsters, cook them, covered, in a steamer basket above boiling water. They will need 1 to 2 minutes less, as the steam is hotter than boiling water. For 1 pound: 5 minutes 1 1/8 pounds: 6 minutes 1 1/4 pounds: 8 minutes 1 1/2 to 2 pounds: 8 to 10 minutes more than 2 pounds : 12 minutes
converting kilograms into pounds is very simple. 1 kilogram = 2.2 pounds
Use this conversion: pounds x 453.9 = grams
To raise the temperature of 1 pound of water 1 degree F requires one BTU. If one pound of water at 62 degreesF is raised to 212 degreesF liquid, 150 BTU's would be required. When one pound of water at 212 degreesF is converted to steam, an additional 970 BTU's are absorbed. The total number of BTU's absorbed in converting one pound of water at 62degreesF to steam is 1,120 BTU's. Water weighs 8.33 pounds per gallon One gallon of water, when converted to steam, will absorb 9,330 BTU's (8.33 times 1,120)
A gram of water and a gram of steam are attracted by the Earth with equal "heaviness". Steam is less *dense* than water, until you get up to thousands of atmospheres of pressure.... then it doesn't seem to matter.
1 pound = 16 ounces pounds X 16 to get onceces
It would take 1 ton of water to create 1 ton of steam.
1stone 6lbs converts to 9.1kg
Steam is a gas, and is not measured in pounds. It is measured in grams, which measures mass.To answer your question, 1 gallon of steam (gaseous water) would have the same mass as 1 gallon of water. If you were to change 1 gallon of water to steam, then their mass would remain the same. This is because changes of state are physical changes in science. According to the law of conservation of mass, mass is neither created nor destroyed during physical or chemical changes (because atoms are not lost or gained.) Therefore, the solid form of one substance does not have more mass than the same substance in liquid or gas form, and vice versa.
For converting milligrams to pound, we use the following formula: Pound = mg รท 453,592.37 Thus, divide the value of milligrams by 453,592.37