It would take 1 ton of water to create 1 ton of steam.
The answer will depend on the units for the temperature.
The answer will depend on the starting temperature of the water. It will also depend on the pressure.
Required for what? Required to do what? Required by whom? Required by what authority? What are you trying to figure out? This could be a drinking water quality question for the municipal water authority, or a chemistry question [how much can you dissolve], or a whole number of other possibilities. Also, so you mean Magnesium metal [Mg] or Magnesium Chloride [MgCl2]? To go along with the Potassium Chloride [KCl].
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam
80 Kgs
How much steam is required to produce 5 MW power in steam turbine?In fully condensing turbine we will need 20 TPH steam required to generate for 5MW
It equals one kilpod.
The amount of MMbtu required to produce one ton of steam can vary depending on the efficiency of the boiler and the pressure of the steam. On average, it takes about 10-12 MMbtu to produce one ton of steam at standard conditions.
Approximately 30,000 gallons of water is required to condense one ton of steam.
1 pound of water at sea level can produce approximately 26.8 cubic feet of steam.
On average, it takes about 660 gallons of water to produce one burger.
On average, it takes about 660 gallons of water to produce one hamburger.
It takes about 23 gallons of water to produce one gallon of almond milk.
On average, about 1050 cubic feet of natural gas is required to produce 1 ton of steam. This can vary depending on the efficiency of the boiler and the heating value of the natural gas being used.
1 M3 of water will make 1 tomme of steam
The answer will depend on the units for the temperature.
Producing a single hamburger requires about 660 gallons of water.