0
What else can I help you with?
What Is the manner in which the physical components of a LAN are connected together?
Network topology is the manner in which the physical components of a LAN are connected together. Network topology can be either physical or logical.
What physical topology is most widely used?
In a LAN, the star topology is very common.
If two computers are connected by an ethernet hub at home is this lan wan or man?
Its LAN
Difference between IEEE 802.3 AND 802.4?
IEEE 802.3 is the standard for Ethernet LAN. It is a collection of IEEE standards for physical layer and Data link layer's MAC sublayer. According to these standards, the Ethernet LAN card works. IEEE 802.4 is a Token Bus standard which was standardised by IEEE. It grants the Bus physical topology to use token messages to access physical layer.
What was the advantage of replacing a physical bus topology with a physical star topology using hubs?
The advantage is in fault detection; in a bus topology any break in any wire segment would cause the entire LAN to fail. With a star topology, a break in any wire segment only affects the one client connected to the network.
Definition of irregular topology?
A topology is the physical configuration of a network. Each network has their own particular type of topology, with the most common being LAN or WAN. Irregular topology is a common topology of LAN, where the information is sent through random connections between computers.
Which is the oldest LAN topology?
Star topology is one of the oldest topology
What is an Ethernet and how is it related to a LAN?
Ethernet is a set of protocols to establish a LAN.
What is a logical network designtopology?
Also called signal topology. Every LAN has a topology, or the way that the devices on a network are arranged and how they communicate with each other. The way that the workstations are connected to the network through the actual cables that transmit data -- the physical structure of the network -- is called the physical topology. The logical topology, in contrast, is the way that the signals act on the network media, or the way that the data passes through the network from one device to the next without regard to the physical interconnection of the devices. Logical topologies are bound to the network protocols that direct how the data moves across a network. The Ethernet protocol is a common logical bus topology protocol. LocalTalk is a common logical bus or star topology protocol. IBM's Token Ring is a common logical ring topology protocol. A network's logical topology is not necessarily the same as its physical topology. For example, twisted pair Ethernet is a logical bus topology in a physical star topology layout. While IBM's Token Ring is a logical ring topology, it is physically set up in a star topology.
What is difference between topology and protocol?
Network topology is the physical design of a LAN which resolves the conflict that occurs between computers on the network attempting to transmit at the same time. Whereas protocols are the standards used by networks to permit communication between network-connected devices. -s74
You are asked to upgrade a bus topology lan at a friend's house to a star topology lan your friend wants to connect three computers and a printer and use the ethernet access method?
Get a four port switch and make your friend's dreams come through. You will need at least 3 LAN cables of CAT-5/5e at least depending on printer's interface.
Ring topology and star topology?
There are number of LAN technologies and each technology is classified into a category according to its topology , two such topologies are star and ring topology. In star topology ,The hub accepts data from a sender and delivers it to receiver, there is no security in star topology . In Ring topology Computers are connected in a circle- the first computer is cabled with the second computer.
