6 inches is half of a foot. A ruler is 1 foot so 6 inches is half of a ruler
0.31 inch
Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
between 5 3/4 and 6 inch marks almost to the 6 inch mark, but not quite
About 1/4 of an inch.
6.7 inches on a ruler is slightly more than 6 and 2/3 inches. It would be found just past the 6-inch mark and before the 7-inch mark. You can estimate it by counting the small increments, where each small line typically represents one-tenth of an inch. Thus, it is approximately two-thirds of the way between the 6 and 7-inch marks.
0.31 inch
Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
That depends on the ruler. If you refer to a 1 foot ruler, divided in inches and sub-inch divisions, then 0.39 inch is a more than a quarter inch, and less than a half inch.
Two inches
between 5 3/4 and 6 inch marks almost to the 6 inch mark, but not quite
inch ruler
Oh, dude, 5.5 inches on a ruler is like, right between the 5-inch mark and the 6-inch mark. It's like the ruler's way of saying, "Hey, I'm not quite 6 inches, but I'm more than 5 inches, so deal with it." So yeah, just look for the little tick mark right in the middle of those two numbers, and you'll find your 5.5 inches.
an inch ruler is 2.5cm and a cm is the same but smaller.....saichona
no
6 millimeters = 0.24 inch.
The answer depends on the measurement units used for 8.3
About 1/4 of an inch.