0
There will be a metal panel at the back with the number on it.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
When was the world first VCR made?
The first VCR was 'probably,' made in the year- of 1968.
Why did your VCR reset its clock 1 hour forward?
hugh ?
If you have direct tv and a cable box a DVD a vcr with surround sound and you would like each one to be able to go through the surround sound how should you hook them all up?
I don't understand why you would have Direct TV (sattelite) and cable TV? However, it depends on the input/output combinations of each component. I have my coaxial cable from my sattelite to the sattelite in jack on the sattelite receiver, the out to TV coaxial from the sattelite receiver run to my VCR plugged to antenna in on the VCR and a coaxial cable from the VCR to the TV coaxial antenna in on the TV. That way, you can watch sattelite without turning the VCR on, but the sattelite receiver has to be off to watch VCR or VHS tapes. Then, run video patch cords (red, white and yellow) out of the DVD to the TV (if the TV has those types of inputs on the back) If you want all three components (sattelite, VCR and DVD) to run through surround sound and NOT the TV, run only the yellow video cord from the DVD to the TV. Run the red and white to the surround sound receiver for each component. Your surround receiver should have multiple inputs for sattelite/cable, VCR and DVD.
What electrical parts of a VCR get damaged by lightning?
Wow, a really vague question. OK, we'll work with it going from a well designed VCR down to a low-end model. High-end VCR's (and other electronic devices) have "Varistors" in them, often called MOV's ("Metal Oxide Varistors"). What are they? Think of them as keepers of a damn, and when the water gets too high, they close the damn. Varistors are rated by voltage and joules (the amount of current that it can't handle). So, for example, a high-end VCR might have a 130 volt or a 150 volt MOV in it. Normally, a MOV appears transparent to the electronics and the voltage, like it doesn't even exist. But, when the voltage applied to it hit's the threshold it is rated for, it shorts out (kind of like connecting two wires togeter), in an effort to protect the electronics further on. To prevent the device from blowing the fuse/circuit breaker in your house, a fuse is *always* added before the MOV, so that when the MOV blows (shorts out), it will force the fuse to blow (open), breaking the connection. So, in a high-end VCR, you would have to replace the MOV and the fuse. Sure, you could get away with just removing the MOV (they cannot be "reset) and just put in a new fuse, but that woudn't be doing it "right". Cheaper VCR's have a fuse and a power transformer. Fairly obviously, you would want to replace the fuse. The cheapest VCR's have power transformers that have built-in thermal fuses, that upon a surge, detect the increased heat and permanently blow. While one might be tempted to simply remove the thermal fuse, it could be a very signficant (and dangerous) act. Often when a transformer blows, some of it's windings get shorted together, creating increased current and therefore increased heat. Bypassing the thermal fuse is great way to get a visit from your local fire department. In this case you would first replace the transformer (and if the fuse if blown), and see how it works. If all holds well, you're fine. If it blows again, more circuitry is shorted (down the power supply line) and it would probably be a good time to get a new VCR.
How do you hook up tv DVD vcr and cable to your pip so it all works and you can't find the owner's manual?
Directions from my grandson: step 1: hook up all the three spliter or red, yellow and white cords into the appropriate places on the back of your tv and your DVD or vcr. Just hook one up and try it; then put it in another location until you get it right. My DVD/tv told me where to place stuff; my brand new HD tv did not. step 2: my grandson neglected to tell me! On your remote for your tv might be an <strong>"input" button</strong>. You have to press the input button and select DVD or VCR so your tv knows what to play. It took me several hours to figure out this last step! It seems all the experts forget it! Sherrie
What is the number of US households with VCR's?
2
How do you disconnect the vcr in a samsung television model number CXD1334?
Disconnecting a VCR from a Samsung TV is simple. All you have to do is download the uninstall program.
What is the universal remote code for magnavox tv and vcr model mc132dmg01?
I bought a RCA Universal Remote Control (Model RCRN03BR) and had to use a VCR code to make this TV/VCR work.The code begins with a "2" because it is a VCR Code. TV's start with a "1".The code is 20081.With this remote, you must do the advance programming to reassign the DVD/VCR button to VCR (it defaults to DVD).Press and hold DVD/VCR button, the power button will illuminate, then press the number 2 and power light will shut off, now release DVD/VCR button and it will work!
What percentage of US television owners also own a VCR?
94.5% of television owners WITHOUT TiVo/DVR have VCR. That number drops to 60% of television owners with TiVo/DVR (but the percentage of people who use VCR when they have digital recording is much lower).
Do I need a VCR stand for my VCR to work properly?
A VCR stand is not necessary to make a VCR working properly as it is only a piece of furniture used to hold the VCR. A VCR will work as long as it is plugged into the wall and hooked up to a TV.
What is the abbreviations of VCR of computer?
The abbreviation of VCR is...
Can you hook a playstation 3 into a VCR?
Yes, as long as your VCR has an composite input. Simply plug the composite cables from your PS3 into your VCR. If you plan on playing your PS3 through your VCR this way your VCR must be turned on for it to work.
Main parts of a VCR?
main parts of a vcr
How do I get a remote for an old Samsung VCR?
Buy a new VCR, then use the remote that came with the new VCR to control the new VCR. Also get a DVD player you caveman
What are the VCR speeds?
A VCR has a tracker, so multiple speeds.
When was VCR - song - created?
VCR - song - was created in 2009.
Who invented VCR?
Charles P. Ginsberg invented the VCR
