0
No, they are designed to reflect signals coming from straight on back to a central point - without the central points being the same, you would just be doubling your area with two receivers, which would double your interference as well - you are better off with a newer, more sensitive dish that has better filtering.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
State two factors by which range of tv signal increase?
There is two main factors when ranging with TV signal and having it increase. The main factors are primary service and city-grade contour.
What do you increase If you connect two twelve volt batteries in parallel?
amps
Why does the amplitude of the EMG signal and the force of contraction increase?
does the amplitude of the EMG signal and the force of contraction increase because a finite number of fibers or are fiting more often, or becasue more fibers are recruited to fire as the intensity of signals in the motorneurons increase, or a combination of the two?
To increase the voltage output when using more than one battery connect the two batteries in?
Series.
How could I increase my signal strength from my router to my ps3?
You can increase the signal strength from the router to the ps3 by clearing the path between the two. Remove any large items that could be blocking the signal path or move the system closer to the router.
Can a cross over cable be used to connect two unlike network devices such as a PC and a hub?
In general, no, you would not use a cross-over cable to connect a hub/switch/router to a PC. This is because the device itself has cross-over circuitry built into it, and if you used a cross-over cable you would be reversing that process. The net effect is that the transmit signal would connect to another transmit signal, when it should be connected to a receive signal.
How many syllables in the word dishes?
There are two syllables in the word dishes. Dish-es
What are the component of electronics?
Electronic have two type of components Active components and Passive components. Active components are those which increase the power of a signal and must be supplied with the signal and a source of power. Passive components do not increase the power of a signal. Active components are Bipolar transistor, Operational amplifier, field effect transistors etc and Passive components are semiconductor, resistor, capacitor, inductor etc
What are two dishes from France?
pizza
How do you connect a stereo RCA phono cable from your turntable to a 3.5 mm line in can this even be done?
A 3.5 mm input is a line level signal, and a turntable has a phono level signal. You can connect these, but you will need a phono preamp to go in between the two. An RCA cable plugs into to the preamp from the turntable, and an RCA to 3.5mm cable connects the preamp to the stereo.
Can you connect wireless modem to a switch which will connect to two routers?
can you connect wireless modem to a switch which will to two routers
Is it possible to connect two Excel workbooks connect data from one to another?
Is it possible to connect two excel workbooks connect data from one to another?
