Best Answer

Sure. 1 metric ton is 1,000 kilograms.

1,000 kilograms of mass has different weights in different places.

I'll make the conversion assuming you want the figure for Earth.

On Earth, 1 kilogram weighs 2.20462 pounds.

1 metric ton = 1,000 kilograms, and weighs 2,204.62 pounds.

7.176 pounds = 7.176/2,204.62 = 0.003255 of the weight of 1 metric ton

Q: How can you convert a substance that weights 7.176 lbs per gal to metric ton per gal?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

The sequence is 3136/4146/5156/6166/7176 So the 15th term is the number 6.

uhm 24 multiplied by 299 7176 hours in 299 days

All multiples of 552, namely: 552, 1104, 1656, 2208, 2760, 3312, 3864, 4416, 4968, 5520, 6072, 6624, 7176, 7728, 8280, 8832, 9384, 9936, 10488, 11040, 11592, 12144, 12696, 13248, 13800, 14352, 14904, 15456, 16008, 16560, 17112, 17664, 18216, 18768, 19320, 19872, 20424, 20976, 21528, 22080, 22632, 23184, 23736, 24288, 24840, 25392, 25944, 26496, 27048, 27600, 28152, 28704, 29256, 29808, 30360, 30912, 31464, 32016, 32568, 33120, 33672, 34224, 34776, 35328, 35880, 36432, 36984, 37536, 38088, 38640, 39192, 39744, 40296, 40848, 41400, 41952, 42504, 43056, 43608, 44160, 44712, 45264, 45816, 46368, 46920, 47472, 48024, 48576, 49128, 49680, 50232, 50784, 51336, 51888, 52440, 52992, 53544, 54096, 54648, 55200, ...

The Approved code of practice goes on to give minimum numbers of facilities: (The number of people at work shown in column 1 refers to the maximum number likely to be in the workplace at any one time) Number of toilets and washbasins for mixed use (or women only): Number of people at work Number of toilets Number of washbasins 1-5 1 1 6-25 2 2 26-50 3 3 51-75 4 4 76-100 5 5 Toilets used by men only: Number of men at work Number of toilets Number of urinals 1-15 1 1 16-30 2 1 31-45 2 2 46-60 3 2 61-75 3 3 76-90 4 3 91-100 4 4 L24, Workplace health, safety and welfare, approved code of practice and guidance, (ISBN 0 7176 0413 6 - available from HSE Books).

All multiples of 312 are divisible by 312, so pick your favourite four: 312, 624, 936, 1248, 1560, 1872, 2184, 2496, 2808, 3120, 3432, 3744, 4056, 4368, 4680, 4992, 5304, 5616, 5928, 6240, 6552, 6864, 7176, 7488, 7800, 8112, 8424, 8736, 9048, 9360, 9672, 9984, 10296, 10608, 10920, 11232, 11544, 11856, 12168, 12480, 12792, 13104, 13416, 13728, 14040, 14352, 14664, 14976, 15288, 15600, 15912, 16224, 16536, 16848, 17160, 17472, 17784, 18096, 18408, 18720, 19032, 19344, 19656, 19968, 20280, 20592, 20904, 21216, 21528, 21840, 22152, 22464, 22776, 23088, 23400, 23712, 24024, 24336, 24648, 24960, 25272, 25584, 25896, 26208, 26520, 26832, 27144, 27456, 27768, 28080, 28392, 28704, 29016, 29328, 29640, 29952, 30264, 30576, 30888, 31200, ...

Related questions

If its recently happened look for a pour in friction modifier that will convert the fluid to 7176 specs. Or have the trans fluid drained and refilled.

312 x 23 = 7176

"You *MUST* use type 7176 transmission fluid in all Chrysler-built automatic transmissions since the mid-70's. Dexron II and III are much more slippery than type 7176/ATF+3 and will cause shuddering during shifts. The latest version of the Mopar ATF is Mopar ATF+3 type 7176, which is what I would use. It is more heat resistant than the prior ATF+2 formula. Yes, there are aftermarket equivalents for the Mopar ATF+ auto trans fluid. The following fluids are among those known to meet Chrysler's MS7176D specs: Citgo ATF type 7176 Esso (Canada) ATF+2 Type 7176 Kendall Type 7176 ATF Quaker State 7176 ATF Pennzoil 7176ATF Texaco Texamatic Fluid CS 7176M Valvoline ATF for Chrysler Vehicles

answer is 7200

That is Mopar ATF+4

No, only use ATF+4 type 7176No, only use ATF+4 type 7176

In the year 1002 or 1003.

ATF+4 type 7176 is what Dodge calls it.

atf plus4 or 7176

Mopar ATF+4 type 7176

(.81)(.81)(.81)(.81)(.81)(.81) = .2824 p = 1 - .2824 = .7176 answer = .7176

Mopar ATF+4 type 7176