You can't. In every engine, even an ideal engine, the output is less than the input. And every real-life engine loses energy to friction, heat, etc. So you'll always have an engine that's less than ideally efficient, and therefore putting out less than you put in.
more input results in more output the function is most likely directly proportional
multiplexer
The output is 1 more than 10 times the input.
It is a relationship from one set to another, which is not a function.
Efficiency as a percent is output/input * 100%12000/15000 * 100% = 80% efficiency which makes sense, because it takes more work (input) than it give out (output). So the efficiency should be less than 100%.
input
An inverter has a high output when the input is low, and a low output when the input is high.
~the function is most likely inversely proportional. ~more input results in less output.
An output force is the force that is exerted from the input force to create motion of the resisting object. the input force can be less or more then the output force
An output force is the force that is exerted from the input force to create motion of the resisting object. the input force can be less or more then the output force
Depends on the size & rating of the battery and alternator. Tested & replaced one for a friend a while ago... his bike a `93 1100ViragoXV. That had a 12v battery and the regulator was outputting around 13.2v. Output should be slightly more than batteries output, input is irrelevant if your alternator is kicking out as it should. Suggest you find a workshop manual for the bike or contact the manufacturer of the regulator for exact specs.
more input results in more output the function is most likely directly proportional
No. A function has only one output per input.
Neither. It is simply a container for the more fragile components.
A table in which you put in a number and out comes another number. Usually more than one groups of numbers. And almost ALWAYS follows a rule such as: Input x3=Output or Input -23= Output Input | Output 2 | 4 10 | 20 16 | 32 In this table you can see that the rule is Input x2 = Output Hope This helped!
More input results in less output. The function is inversely proportional.
Output power can never be more than input power. With a transformer, it is possible to increase the output current (while decreasing the output voltage), or to decrease the output current (while increasing the output voltage).