Q: How did FPM improve earlier memory modes?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

You can convert in w.c. to feet per minute and then convert fpm to CFM. FPm is 4005 times the square root of the pressure. So to convert 1 " w.c. to fpm its the square root of 1, which is 1 times 4005, which is 4005 fpm. Then you multiply the fpm by the area of the space the air is moving through. So if you have 1 " wc moving through a hole that's 1 square foot in area, that's 4005 cubic feet per minute.

You can convert in w.c. to feet per minute and then convert fpm to CFM. FPm is 4005 times the square root of the pressure. So to convert 1 " w.c. to fpm its the square root of 1, which is 1 times 4005, which is 4005 fpm. Then you multiply the fpm by the area of the space the air is moving through. So if you have 1 " wc moving through a hole that's 1 square foot in area, that's 4005 cubic feet per minute.

10560 fpm

2288 fpm times 60 = 137,280 fph 137,280 divided by 5280 = 26 mph

This will depend greatly on the filter you want to use. A flat filter will need to be larger than a pleated filter. Determine what efficiency you need from your air filter. Look up the maximum "face velocity" across the filter, most are around 500fpm. Divide the blower cfm by the filter fpm and you will end up with ft2 or filter needed. Let's do an example of a 2000cfm blower with a filter that requires a face velocity of 400feet/min. 2000ft3/m / 400ft/m = 5ft2 or (1)24"x30" filter.

Related questions

It is not available it is replaced by FPM memory

FPM is feet per minute

The transfer rate of Fpm is 320MBps.

Legacy FPM-RAM has 30 pins

I believe this is known as dynamic memory. The most common dynamic memory is the RAM in your computer.

To convert feet per minute (FPM) to cubic feet per minute (CFM), you need to multiply the FPM by the cross-sectional area of the opening in square feet through which the air is moving. The formula is CFM = FPM x Area.

No less than 35 flashes per minute (fpm) no more than 65 fpm

630 feet per minute (fpm) is equivalent to about 7.16 miles per hour (mph).

You can convert in w.c. to feet per minute and then convert fpm to CFM. FPm is 4005 times the square root of the pressure. So to convert 1 " w.c. to fpm its the square root of 1, which is 1 times 4005, which is 4005 fpm. Then you multiply the fpm by the area of the space the air is moving through. So if you have 1 " wc moving through a hole that's 1 square foot in area, that's 4005 cubic feet per minute.

30 MPH

It's Feet per Minute