You can convert in w.c. to feet per minute and then convert fpm to CFM. FPm is 4005 times the square root of the pressure. So to convert 1 " w.c. to fpm its the square root of 1, which is 1 times 4005, which is 4005 fpm. Then you multiply the fpm by the area of the space the air is moving through. So if you have 1 " wc moving through a hole that's 1 square foot in area, that's 4005 cubic feet per minute.
You can convert in w.c. to feet per minute and then convert fpm to CFM. FPm is 4005 times the square root of the pressure. So to convert 1 " w.c. to fpm its the square root of 1, which is 1 times 4005, which is 4005 fpm. Then you multiply the fpm by the area of the space the air is moving through. So if you have 1 " wc moving through a hole that's 1 square foot in area, that's 4005 cubic feet per minute.
71400 cubic inches of water weighs approx 11466 Newtons.
Convert everything to feet, then use the formula for the volume of a cylinder. Since the answer will be in cubic feet, you'll then have to convert it to gallons.
48 * 54 * 54 = 131220 cubic inches.48 * 54 * 54 = 131220 cubic inches.48 * 54 * 54 = 131220 cubic inches.48 * 54 * 54 = 131220 cubic inches.
Diameter is a length measurement. Cubic inches is a volume measurement. Diameter cannot be measured in or converted to cubic inches.
No, standard cubic feet per minute (SCFM) is a measure of gas flow rate, while inches of water is a unit of pressure. The two units cannot be directly converted into each other as they measure different physical quantities.
To convert pounds (lb) to cubic inches (inΒ³), you need the density of the material. The conversion is based on the formula: 1 pound = 27.68 cubic inches for water (density = 62.4 lb/ftΒ³). So for 194 lbs, the volume in cubic inches would be 194 * 27.68 = 5,366.72 inΒ³ if it were water.
You can't convert those units. Milimeters of water (mmH2O) is a unit of pressure equal to about 13.6 mmHg. Cubic feet per minute is a measure of fluid flow.
To convert cubic inches to gallons, divide the volume in cubic inches by 231. This gives you the equivalent volume in gallons. In this case, a glass aquarium with a volume of 2315.52 cubic inches will hold approximately 10 gallons of water.
To convert cubic inches to gallons, first find the volume in cubic inches by multiplying the length, width, and height (30 x 18 x 6 = 3240 cubic inches). Then, divide the cubic inches by 231 to convert to gallons (3240 / 231 = 14.03 gallons).
You can convert in w.c. to feet per minute and then convert fpm to CFM. FPm is 4005 times the square root of the pressure. So to convert 1 " w.c. to fpm its the square root of 1, which is 1 times 4005, which is 4005 fpm. Then you multiply the fpm by the area of the space the air is moving through. So if you have 1 " wc moving through a hole that's 1 square foot in area, that's 4005 cubic feet per minute.
There are approximately 5.9 liters in 360 cubic inches.
There are 17.66 gallons in 4,080 cubic inches of water.
25,773
Simple 3x14=42cubic inches so at a rate of 9cubic inches per minute. 42ci/9ci/m=4.7m then you multiply 4.7 by 60 to convert to seconds as it is the standard form for most physics. 4.7x60=282s so it would take 282 seconds to fill the cylinder
First convert all units to the same units - everything to inches, or everything to feet. Then use the formula for a cylinder to calculate the volume, which will be in cubic inches, or cubic feet. Finally you'll have to convert that to gallons.
its 7.48 gallons of water per cubic foot, so calculate your cubic feet then times it by 7.48, but dont forget that that is in cubic FEET, not inches, plugging in the numbers given will give you cubic inches, the best thing to do is to convert the 6" into feet, then do your calculations