By using a micrometer
A bolt is not a standard object.
1/2"x2" m.s bolt
An impact wrench delivers a rotating hit to an object. It is used to loosen things like a rusted nut on a large bolt. However, it may not work as efficiently on a small object.
His power object is the Trident. Like how Zeus has his Lightning Bolt.
You make sure the gun is unloaded. Open the bolt. When the bolt stops, look at the lower left of the bolt and you will see a small lever next to the extractor. With a small screwdriver, press the small lever down and at the same time pull back on the bolt, The bolt will slide right out.
Gauges to allow a person to calculate nut bolt size are widely available. Measuring the thread manually can be unreliable so it is far preferable to use a gauge.
on the rear of left side of the bolt between the bolt and the receiver housing is a small lever that mist be pushed down with a small screwdriver. hold down and pull the bolt out.
A bolt is not a standard object.
a nut and bolt.
torque 39 nm (29 ft-lb) then 90 degrees then another 90 degrees 2 small bolts at front 21 nm (15 ft-lb)
45
afhdsfhjsdhf