0
by multiplying the pipe size with the number of welded joints.
regards
ZH
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Inch dia calculation factors?
Inch dia = Number of weld joints X Size of the pipe
What is difference between dia inch and inch dia?
no differnece
What will be the surface area of pipe if pipe dia is 6 inch and length is 7.5 meter?
Surface area of the pipe: diameter*pi*length but make sure that the diameter and length are both in meters or inches.
What is difference between inch and inch dia?
one inch is one inch; one inch dia refers to one inch diameter of a circle; it is still one inch
What is the volume of a 2 inch pipe per foot?
volume of a pipe is pi * r * r *h where pi=3.1412 r = half the dia of pipe h= length of the pipe make sure u take r and h in same units in this case keep it inches so your answer is 3.1412 * 1 inch * 1 inch*12 inches(foot) = 37.6944 cubic inches or 0.2617 cubic feet
What is the unit weight of 4 inch dia GI pipe and wallthickness?
Please Calculate the weight per fit of G.I. pipe
How do you calculate weight of pipe by inch dia?
You need more information than that ! You need the density of the material it's made from, and the thickness of the pipe !
6 inch weldolet welded to 12 inch pipe what is the inch dia involved?
The meaning of dia inch is the number of weld joints multiplied by the dia of a given pipe size, since the weld joints is on the 6" pipe, the calculations should be 1 weld x 6" = 6 dia inch.
How do calculate a welding rods per inch dia in ms pipe welding?
You multiply the number of welds by the diameter of the pipe that those welds are applicable to.
Inch dia calculation factors?
Inch dia = Number of weld joints X Size of the pipe
How do you calculate diameter inches of weld?
let say you have 4" dia. of pipe and 10 welds so the total diameter inch of weld are 4 x 10 = 40 dia. inches
What is standard rate in inch-dia fabrication of pipes per day?
standard rates of pipe fabrication per inch dia
When saying calculating inch dia of pipe is number of welded joints x pipe size that refers to lenght of pipe or diameter of pipe?
Pipe size refers to the diameter of the pipe (in inch).
What is the XXh brass pipe?
XXh in piping is a determination of the wall thickness of the pipe. XXh stands for double extra heavy (or double extra strong) under an old standard measuring system. It has the thickest pipe wall of any other. The actual thickness is dependent on the nominal pipe diameter. Present determination of wall thicknesses of pipes is called schedules. Schedule 10 pipe is the thinnest while schedule 160 is the thickest. Heavy pipe is slightly thicker than today's sch. 40 pipe, extra heavy slightly thicker than sch. 80 pipe, and double extra heavy is slightly thicker than today's sch. 160 pipe. XXh pipe is no longer in use commercially and has been replaced with schedule 160 pipe, XXh Brass or Bronze pipe is forged or molded from bronze, rather than Iron or steel. Some wall thicknesses of double extra strong pipes are: 1/2 inch nom. dia. = 0.294 inch thick 3/4 inch nom. dia. = 0.308 inch thick 1 inch nom. dia. = 0. 358 inch thick 1 1/4 inch nom. dia. = 0.382 inch thick 1 1/2 inch nom. dia. = 0.400 inch thick 2 inch nom. dia. = 0.436 inch thick
How do you calculate length of pipe if dia is given?
You can't. They are independent of one another. A pipe of a given diameter may have any length, and vice-versa.
What press force you need to have to flatten ms round Pipe for 1 to 20 pipe and 750mm length and 12mm thickness of wall?
1 inch to 20 inch Dia of pipe. Please answer me as soon as possible. If possible, give me equation for the same.
What is difference between dia inch and inch dia?
no differnece
